+++ /dev/null
-** ============================================================================
-**
-** Sample response file for IBM DB2
-** --------------------------------
-** To select features and settings to install, uncomment the corresponding
-** keywords and specify values for those keywords. You do not need to select
-** features if you select the TYPICAL or COMPACT installation options.
-**
-** Comments are made by placing either an asterisk (*) or a hash symbol (#) at
-** the start of a line, or by placing ** or ## after the start of a line to
-** comment out the rest of that line.
-** All keywords that are currently uncommented (not preceded by * or #) are
-** mandatory and must be assigned values for the installation to continue.
-** All other keywords are optional. If optional keywords are not specified,
-** the installation will proceed using default values. Lines that start out
-** with two asterisks are documentation and should not be enabled.
-**
-** For more information on creating or configuring an ESE instance with the
-** DB2 pureScale Feature, see "Installing the
-** IBM DB2 pureScale feature for DB2 Server Edition
-** using a response file" in the DB2 Information Center.
-** For more information on configuration parameters, see "Configuring the DB2 database manager with
-** configuration parameters" in the DB2 Information Center.
-**
-** For more information on DB2 registry and environment variables, and configuration
-** parameters, see "DB2 registry and environment variables" in the DB2 Information Center.
-**
-** For more information on how to perform a response file installation, see
-** "Response file considerations" in the DB2 Information Center.
-**
-** Refer to the DB2 Information Center at:
-** https://www-01.ibm.com/support/knowledgecenter/SSEPGG_12.1.1/com.ibm.db2.luw.kc.doc/welcome.html
-**
-** ============================================================================
-** General Options
-** ---------------
-
-** Only one product can be specified for the following PROD keyword. Specifying
-** multiple products in an installation is not supported.
-PROD = DB2_SERVER_EDITION
-
-** The FILE keyword determines the base installation path. If you specify a
-** path that does not yet have this product, this will install a new copy. If
-** you specify a path that has this product, this will be considered an
-** existing installation intended to install additional functionality. This is
-** a mandatory keyword for root installation. Remove this keyword for non-root
-** installation. If not removed, its value must be $HOME/sqllib where $HOME
-** represents the HOME directory of the non-root user ID that owns the non-root
-** installation.
-FILE = /opt/ibm/db2/V12.1
-
-** Modify the value of the following LIC_AGREEMENT keyword to indicate that you
-** have read and agreed to the license agreement file in the db2/license
-** directory.
-LIC_AGREEMENT = ACCEPT ** ACCEPT or DECLINE
-
-** If an interactive type is set, db2setup will prompt for CD locations and
-** give feedback as to progress, otherwise nothing will be displayed until the
-** installation is complete.
-*INTERACTIVE = NONE ** NONE, YES, MACHINE
-
-** The CONFIG_ONLY keyword is used to specify that the response file is being
-** used for creating or configuring an instance, and nothing is to be
-** installed. This keyword must be set to YES if a response file is used with
-** db2isetup.
-*CONFIG_ONLY = ** YES or NO
-
-** INSTALL_TYPE keyword is used to select the installation type. If you specify
-** a TYPICAL or a COMPACT install type, no COMP keywords are required. In this
-** case the installer will select the appropriate components for you. All COMP
-** keywords are ignored by the installer unless the INSTALL_TYPE is set to
-** CUSTOM. If you select the CUSTOM install type, then ensure that you enable
-** all of the COMP keywords that are required for your database environment.
-**
-** Note: The install type is not related to the language selection.
-** ----------------------------------------------------------------------------
-INSTALL_TYPE = CUSTOM ** TYPICAL, COMPACT, CUSTOM
-
-** The following components are part of all TYPICAL installations. If you
-** perform a typical installation, all of these components will be installed on
-** your computer.
-** ----------------------------------------------------------------------------
-
-** DB2 Advanced Copy Services help protect mission-critical data that requires
-** 24x7 availability. It offers an integrated solution designed to implement
-** high-efficiency backup and restore processes and helps eliminate
-** backup-related performance issues.
-*COMP = ACS ** Integrated Flash Copy Support
-
-** Provides federated support required to access DB2 for iSeries and DB2 for
-** z/OS and OS/390 data sources.
-*COMP = DB2_DATA_SOURCE_SUPPORT ** DB2 data source support
-
-** Sample database source provides sample data and metadata that allows you to
-** create a sample database using the First Steps application.
-COMP = DB2_SAMPLE_DATABASE ** Sample database source
-
-** Enables users and applications with Federated Data Source Access
-*COMP = FED_DATA_SOURCE_SUPPORT ** Federated Data Access Support
-
-** First Steps is a graphical tool that will help familiarize you with DB2
-** features and functions.
-*COMP = FIRST_STEPS ** First Steps
-
-** Guardium Installation Manager Client component will place the Guardium
-** Installation Manager(GIM) Client under DB2 Install Path.
-*COMP = GUARDIUM_INST_MNGR_CLIENT ** Guardium Installation Manager Client
-
-** The DB2 Instance Setup wizard is a Java-based tool you can use to set up
-** instances on your computer after installing DB2.
-COMP = INSTANCE_SETUP_SUPPORT ** DB2 Instance Setup wizard
-
-** LDAP Exploitation allows DB2 to use an LDAP directory to store database
-** directory and configuration information.
-*COMP = LDAP_EXPLOITATION ** DB2 LDAP support
-
-** Pacemaker is an open-source, high availability cluster manager software
-** integrated on Linux.
-*COMP = PCMK ** Pacemaker
-
-** IBM Tivoli System Automation for Multiplatforms provides high availability
-** and disaster recovery capabilities for AIX, Linux, Solaris SPARC, and
-** Windows.
-** If this component is selected, it will either be installed, updated or
-** upgraded by the DB2 installer. Use COMP=TSAMP only if you are running as
-** root user.
-*COMP = TSAMP ** Tivoli SA MP
-
-
-** The following components are not part of TYPICAL installations, and thus can
-** only be installed through CUSTOM installs.
-** ----------------------------------------------------------------------------
-
-** The base application development tools component contains tools and files
-** (including header files, libraries, and a precompiler) that are needed for
-** developing applications that work with DB2.
-COMP = APPLICATION_DEVELOPMENT_TOOLS ** Base application development tools
-
-** A scalable, highly-available, high performance file system optimized for
-** multi-petabyte storage management.
-** If this component is selected, it will either be installed, updated or
-** upgraded by the DB2 installer. Use COMP=GPFS only if you are running as
-** root user.
-*COMP = GPFS ** General Parallel File System (GPFS)
-
-** Application data sources use an application to access the underlying
-** nonrelational data. The raw data can be in a number of standard and
-** nonstandard formats.
-*COMP = IINR_APPLICATIONS_WRAPPER ** Application data sources
-
-** Scientific data sources are developed exclusively for the life sciences
-** industry, such as those containing genomic, proteomic, bioinformatic, and
-** cheminformatic information.
-*COMP = IINR_SCIENTIFIC_WRAPPER ** Scientific Data Sources
-
-** Structured file data sources contain nonrelational data stored in files with
-** a defined, repeatable structure.
-*COMP = IINR_STRUCTURED_FILES_WRAPPER ** Structured file data sources
-
-** Enables users and applications to submit distributed requests for data
-** managed by Informix systems.
-** This feature is only installed and not configured when the PURESCALE feature
-** is selected for installation.
-*COMP = INFORMIX_DATA_SOURCE_SUPPORT ** Informix data source support
-
-** Enables users and applications to submit distributed requests through JDBC
-** for data managed by DBMS.
-COMP = JDBC_DATA_SOURCE_SUPPORT ** JDBC data source support
-
-** Enables users and applications to submit distributed requests for data
-** stored in any data source that supports ODBC and X/Open CLI compliant
-** drivers.
-COMP = ODBC_DATA_SOURCE_SUPPORT ** ODBC data source support
-
-** Enables users and applications to submit distributed requests for data
-** managed by Oracle systems.
-*COMP = ORACLE_DATA_SOURCE_SUPPORT ** Oracle data source support
-
-** The IBM DB2 pureScale Feature provides clustering technology to DB2 products
-** on distributed platforms.
-** Selecting the PURESCALE feature will automatically install every other
-** required component. See the DB2 Information Center for more information on
-** the pre-installation planning and prerequisites needed for a successful IBM
-** DB2 pureScale installation and instance setup. Use COMP=PURESCALE only if
-** you are running as root user.
-*COMP = PURESCALE ** IBM DB2 pureScale Feature
-
-** Spatial Extender client contains the support required for communicating with
-** a Spatial Extender server.
-*COMP = SPATIAL_EXTENDER_CLIENT_SUPPORT ** Spatial Extender client
-
-** Provides Spatial Extender support for the DB2 server, providing the storing
-** and query of geographical information in DB2 tables.
-*COMP = SPATIAL_EXTENDER_SERVER_SUPPORT ** Spatial Extender server support
-
-** Enables users and applications to submit distributed requests for data
-** managed by Microsoft SQL Server systems.
-*COMP = SQL_SERVER_DATA_SOURCE_SUPPORT ** SQL Server data source support
-
-** Enables users and applications to submit distributed requests for data
-** managed by Sybase systems.
-*COMP = SYBASE_DATA_SOURCE_SUPPORT ** Sybase data source support
-
-** Enables users and applications to submit distributed requests for data
-** managed by Teradata systems.
-*COMP = TERADATA_DATA_SOURCE_SUPPORT ** Teradata data source support
-
-** The DB2 Text Search component, powered by OmniFind, delivers an integrated,
-** high quality and scalable search technology in DB2 databases.
-** This feature is only installed and not configured when the PURESCALE feature
-** is selected for installation.
-*COMP = TEXT_SEARCH ** DB2 Text Search
-
-** The following languages apply to all translated components. Enable the
-** language(s) you want installed. If you do not enable any language keywords,
-** then the English language (EN) will still be installed by default.
-** ---------------------------------------------------------------------------
-*LANG = BR ** Portuguese - Brazil (pt_BR)
-*LANG = CN ** Simplified Chinese (zh_CN)
-*LANG = CZ ** Czech (cs_CZ)
-*LANG = DE ** German (de_DE)
-*LANG = ES ** Spanish (es_ES)
-*LANG = FR ** French (fr_FR)
-*LANG = IT ** Italian (it_IT)
-*LANG = JP ** Japanese (ja_JP)
-*LANG = KR ** Korean (ko_KR)
-*LANG = PL ** Polish (pl_PL)
-*LANG = RU ** Russian (ru_RU)
-*LANG = TW ** Traditional Chinese (zh_TW)
-
-
-** (Valid for non-root upgrade only) Upgrade Older Release
-** -------------------------------------------------------
-** Specify whether you want to upgrade any previous versions of the product.
-** Specifying this keyword will remove any previous version and upgrade any
-** settings to the new installation. Be aware that during upgrade of the
-** current copy, only the product specified in the response file will be
-** installed. Other previously installed products need to be upgraded
-** separately following this upgrade.
-*UPGRADE_PRIOR_VERSIONS = FALSE ** TRUE or FALSE
-
-** IBM DB2 pureScale Feature Host Information
-** ------------------------------------------
-** Specify the hosts to which the DB2 product is to be installed. This section
-** must always list the installation initiating host. Do no specify any
-** keywords in this section if you are not installing the IBM DB2 pureScale
-** Feature. Ensure that password-less ssh root access is available on all hosts
-** and between all hosts.
-
-** The HOST keyword is used to specify a host identifier for one set of host
-** keys. This keyword is mandatory if you are installing the IBM DB2 pureScale
-** Feature.
-*HOST = host1 ** char(14) no spaces
-
-** Use the HOSTNAME keyword with the host identifier prefix to identify the
-** name of the host. A host can be a physical machine or LPAR, on which a DB2
-** member or a cluster caching facility will run. If an alias or IP address is
-** provided, the installer will attempt to convert it to a canonical hostname
-** prior to instance creation. The host name must be a unique host name across
-** the network. The following formats are accepted: long name (for example,
-** host1.ibm.com), short name (for example, host1), IP address (IPv4:
-** xxx.xxx.xxx.xxx). This keyword is mandatory if you have specified the HOST
-** keyword.
-*host1.HOSTNAME = ** char(255) no spaces
-
-** The CLUSTER_INTERCONNECT_NETNAME keyword is used to specify the name of a
-** high speed interconnect name that corresponds to a high speed adapter name.
-** Refer to the DB2 Information Center for valid types of high speed adapters.
-** This keyword is mandatory if you have specified the HOST keyword.
-*host1.CLUSTER_INTERCONNECT_NETNAME = ** char(255) no spaces
-
-
-*HOST = host2 ** char(14) no spaces
-*host2.HOSTNAME = ** char(255) no spaces
-*host2.CLUSTER_INTERCONNECT_NETNAME = ** char(255) no spaces
-
-** Instance Creation Settings
-** --------------------------
-** User IDs managed by NIS/NIS+ are not supported. If an existing user ID is
-** used, make sure it is not locked and its password has not expired.
-
-** Prefix name of one instance set. To create or update an instance, one set of
-** instance keywords must be specified. The instance set is comprised of the
-** identifying prefix value for the INSTANCE key followed by the keys that are
-** prefixed by the specified INSTANCE prefix value. If you are creating a DSF
-** instance you can only specify one instance at a time in this response file.
-** Note: DSF is the instance type for a IBM DB2 pureScale instance. If you are
-** not creating a DSF instance, then multiple instances can be specified for
-** creation or update in this response file.
-INSTANCE = DB2_INST ** char(8) no spaces
-
-** Real name of the instance, and also the user ID of instance owner. It can be
-** different from the value of the INSTANCE keyword. If an existing ID is
-** specified for the instance's NAME keyword, make sure the user ID exists on
-** all the participating hosts with the same UID, GID, corresponding group
-** name, user name and user home directory. Ensure that existing user IDs are
-** not locked and that the password has not expired. IBM DB2 pureScale Feature
-** users must specify a name that is unique across the IBM DB2 pureScale
-** implementation.
-DB2_INST.NAME = db2admin ** char(8) no spaces, no upper case letters
-
-** The UID will be generated if the keyword is not specified - highly
-** recommended.
-*DB2_INST.UID = ** Unsigned integer
-DB2_INST.GROUP_NAME = db2grp ** char(30) no spaces
-
-** Use a generated GID if no value provided - highly recommended.
-*DB2_INST.GID = ** Unsigned integer
-*DB2_INST.HOME_DIRECTORY = ** char(64) no spaces. Valid for root installation only
-*DB2_INST.PASSWORD = Passw@rd01 ** Valid for root installation only
-
-** If PURESCALE is selected or installed, the default instance type will be
-** DSF.
-DB2_INST.TYPE = ESE ** DSF ESE WSE STANDALONE CLIENT
-
-** Set the instance to be auto-started after system reboot. The AUTOSTART
-** keyword can only be used by a root installation and only a non-pureScale
-** instance type. This keyword is invalid for non-root installation. This
-** keyword cannot be used for DSF instance type.
-DB2_INST.AUTOSTART = YES ** YES or NO
-
-** The START_DURING_INSTALL keyword will start the instance during the
-** installation. If this keyword is not specified, the behavior follows the
-** AUTOSTART keyword above.
-DB2_INST.START_DURING_INSTALL = YES ** YES or NO. Default is YES.
-*DB2_INST.SVCENAME = db2c_db2inst1 ** BLANK or char(14). Reserved for root installation only
-DB2_INST.PORT_NUMBER = 50000 ** 1024 - 65535, Reserved for root installation only
-
-** The ports in range [FCM_PORT_NUMBER, FCM_PORT_NUMBER+MAX_LOGICAL_NODES] are
-** reserved during the installation. Valid for root installation only. If your
-** instance type is DSF, the ports in range [FCM_PORT_NUMBER,
-** FCM_PORTNUMBER+MAX_LOGICAL_NODES+3] is reserved. The ports have to be
-** continuous and identical on all the participating hosts.
-*DB2_INST.FCM_PORT_NUMBER = 20000 ** 1024 - 65535, the beginning port number.
-*DB2_INST.MAX_LOGICAL_NODES = ** 1 - 128 for DSF instances or 1 - 199 for ESE instances. It is a maximum number of logical members to be used on one member host. Valid for root installation only.
-
-** The DB2CF_PORT_NUMBER and the DB2CF_MGMT_PORT_NUMBER are to be reserved for
-** the cluster caching facility (CF). As the CF is an instance designation, the
-** port names will be pre-defined based on the name of the instance. Example:
-** Where the instance name is db2sdin1, the names required for the CF ports
-** will be DB2CF_db2inst1 and DB2CF_db2inst1_MGMT. Ensure that all the port
-** names are the same on all the participating hosts. The two CF ports must be
-** available on all the participating hosts. If you want the installer to
-** generate these values, leave them commented out.
-*DB2_INST.DB2CF_PORT_NUMBER = 56001 ** 1024 - 65535.
-*DB2_INST.DB2CF_MGMT_PORT_NUMBER = 56000 ** 1024 - 65535.
-
-** The PREFERRED_PRIMARY_CF is used to specify the preferred primary cluster
-** caching facility needed to create a new IBM DB2 pureScale instance. This
-** keyword is mandatory if you are creating a new IBM DB2 pureScale instance.
-** The value provided must match the value of any HOST keyword specified in
-** this response file. If you are extending an instance, this keyword should be
-** commented out.
-*DB2_INST.PREFERRED_PRIMARY_CF = ** a host identifier, char(14)
-
-** The PREFERRED_SECONDARY_CF is used to specify the preferred secondary
-** cluster caching facility for the IBM DB2 pureScale instance. The value
-** provided must match the value of any HOST keyword specified in this response
-** file. This host identifier should be specified in any HOST section.
-*DB2_INST.PREFERRED_SECONDARY_CF = ** a host identifier, char(14)
-
-** The MEMBER keyword is required if you are creating a new IBM DB2 pureScale
-** instance. The value provided must match the value of any HOST keyword
-** specified in this response file. Specify more MEMBER keywords so that each
-** new host is defined in this response file as either a DB2 member or a
-** cluster caching facility (CF host, see above).
-*DB2_INST.MEMBER = ** a host identifier, char(14)
-*DB2_INST.CLIENT_IMPORT_PROFILE = ** a full path or a file in the same directory as the response file
-
-** Do not set FEDERATED if you are creating or configuring a DSF instance.
-*DB2_INST.FEDERATED = ** YES or NO
-
-** Do not set INFORMIX_CLIENT_HOME if you are creating or configuring a DSF
-** instance.
-*DB2_INST.INFORMIX_CLIENT_HOME = BLANK ** BLANK, char(1023)
-
-** Do not set INFORMIX_SERVER_HOME if you are creating or configuring a DSF
-** instance.
-*DB2_INST.INFORMIX_SERVER_HOME = BLANK ** BLANK, char(1023)
-*DB2_INST.ORACLE_HOME = ** any valid path , char(64) no spaces
-*DB2_INST.SYBASE_HOME = ** any valid path, char(1023)
-*DB2_INST.SYBASE_OCS = ** valid SYBASE_OCS directory name, char(1023)
-*DB2_INST.SQLSERVER_ODBC_LIB_PATH = ** the full path name where libodbc file is in, char(1023)
-*DB2_INST.SQLSERVER_ODBC_INI_PATH = ** the full path name of .odbc.ini file including the file name, char(1023)
-*DB2_INST.TERADATA_CLI_PATH = ** the full path name to libcliv2.so library
-*DB2_INST.TERADATA_ERRMSG_PATH = ** the full path name to errmsg.txt error message file
-*DB2_INST.AUTHENTICATION = SERVER ** CLIENT, SERVER, or SERVER_ENCRYPT
-
-** An existing user ID should be specified for DB2SSHID_USERNAME keyword, make
-** sure the user ID exists on all the participating hosts with the same UID,
-** GID, corresponding group name, user name and user home directory. Ensure
-** that existing user IDs are not locked and that the password has not expired.
-** IBM DB2 pureScale Feature users must specify a name that is unique across
-** the IBM DB2 pureScale implementation.
-*DB2_INST.DB2SSHID_USERNAME = ** char(8) no spaces, no upper case letters
-
-** Tivoli SA MP Tiebreaker Settings (IBM DB2 pureScale Feature only)
-** -----------------------------------------------------------------
-** The DB2_CLUSTER_SERVICES_TIEBREAKER_DEVICE_PATH keyword is used to specify
-** the device path for Tivoli SA MP Tiebreaker setup. The keyword is mandatory
-** when setting up the first IBM DB2 pureScale instance.
-
-** All the hosts specified in HOST section must have direct access to this
-** disk.
-*DB2_CLUSTER_SERVICES_TIEBREAKER_DEVICE_PATH = ** a valid device path, for example, /dev/sda
-
-** Shared File System Settings (IBM DB2 pureScale Feature only)
-** ------------------------------------------------------------
-** Only one of the following two keywords is needed when setting up the first
-** IBM DB2 pureScale instance on the host; If both INSTANCE_SHARED_DEVICE_PATH
-** and INSTANCE_SHARED_DIR are specified, INSTANCE_SHARED_DIR will be ignored.
-** If the task is to extend an instance to a new host, both of these keywords
-** will be ignored.
-
-** Specify INSTANCE_SHARED_DEVICE_PATH to create a DB2 cluster file system. All
-** the hosts specified in the HOST sections should have direct access to the
-** shared device path specified.
-*INSTANCE_SHARED_DEVICE_PATH = ** a valid device path, for example, /dev/sda
-
-** Specify the INSTANCE_SHARED_MOUNT to define the mounting point of the new
-** DB2 cluster file system. It is optional and valid only if
-** INSTANCE_SHARED_DEVICE_PATH is specified.
-*INSTANCE_SHARED_MOUNT = ** a valid mount point of the new DB2 cluster file system.
-
-** Specify the INSTANCE_SHARED_DIR to use a user-managed shared file system for
-** instance creation.
-*INSTANCE_SHARED_DIR = ** a valid mount point of shared file system.
-
-** Fenced User Creation Settings
-** -----------------------------
-** Valid for root installation only. User IDs managed by NIS/NIS+ are not
-** supported. If an existing ID is used, make sure it is not locked and its
-** password has not expired.
-
-** Make sure the user name specified for FENCED_USERNAME is not locked and its
-** password has not expired.
-DB2_INST.FENCED_USERNAME = db2fncd ** char(8) no spaces, no upper case letters
-
-** If no value is provided for FENCED_UID keyword, the DB2 installer will
-** generate one for you. This is highly recommended.
-*DB2_INST.FENCED_UID = ** Unsigned integer
-DB2_INST.FENCED_GROUP_NAME = db2fgrp ** char(30) no spaces
-
-** If no value is provided for FENCED_GID keyword, the DB2 installer will
-** generate one for you. This is highly recommended.
-*DB2_INST.FENCED_GID = ** Unsigned integer
-*DB2_INST.FENCED_HOME_DIRECTORY = ** char(64) no spaces
-
-** This FENCED_PASSWORD is required if the fenced user ID is a new user
-*DB2_INST.FENCED_PASSWORD = ** char(8)
-
-** Text Search Configuration
-** -------------------------
-
-** Do not set CONFIGURE_TEXT_SEARCH if you are creating or configuring a DSF
-** instance.
-*DB2_INST.CONFIGURE_TEXT_SEARCH = NO ** YES or NO
-
-** Do not set TEXT_SEARCH_HTTP_SERVICE_NAME if you are creating or configuring
-** a DSF instance.
-*DB2_INST.TEXT_SEARCH_HTTP_SERVICE_NAME = db2j_db2inst1 ** BLANK or char(14). Valid for root installation only
-
-** Do not set TEXT_SEARCH_HTTP_PORT_NUMBER if you are creating or configuring a
-** DSF instance.
-*DB2_INST.TEXT_SEARCH_HTTP_PORT_NUMBER = 55000 ** Any unused port number from 1024 - 65535
-
-** Instance DBM CFG Settings
-** -------------------------
-*DB2_INST.CF_DIAGLEVEL = 2 ** a number in range [0 - 4]
-*DB2_INST.CF_DIAGPATH = ** BLANK or char(215)
-*DB2_INST.CF_MEM_SZ = AUTOMATIC ** AUTOMATIC or a number in range [32768 - 4 294 967 295]
-*DB2_INST.CF_NUM_CONNS = AUTOMATIC ** AUTOMATIC or a number in range [4-256]
-*DB2_INST.CF_NUM_WORKERS = AUTOMATIC ** AUTOMATIC or a number in range [1 - 31]
-*DB2_INST.RSTRT_LIGHT_MEM = AUTOMATIC ** 1-10 for AUTOMATIC or a number in range [1 - 50]
-*DB2_INST.AGENTPRI = ** SYSTEM, -1 or 41-128
-*DB2_INST.ASLHEAPSZ = ** 1 - 524288
-*DB2_INST.AUDIT_BUF_SZ = ** 0 - 65000
-*DB2_INST.CATALOG_NOAUTH = ** 0, 1, YES or NO
-*DB2_INST.CLUSTER_MGR = ** TSA, VENDOR:<fully qualified vendor library>
-*DB2_INST.COMM_BANDWIDTH = ** -1 or 0.1 - 100000.0
-*DB2_INST.CONN_ELAPSE = ** 0 - 100
-*DB2_INST.CPUSPEED = ** -1 or 1e-10 - 1
-DB2_INST.DFTDBPATH = /data ** any valid path
-*DB2_INST.DFT_ACCOUNT_STR = ** BLANK or char(25)
-*DB2_INST.DFT_MON_BUFPOOL = ** ON or OFF
-*DB2_INST.DFT_MON_LOCK = ** ON or OFF
-*DB2_INST.DFT_MON_SORT = ** ON or OFF
-*DB2_INST.DFT_MON_STMT = ** ON or OFF
-*DB2_INST.DFT_MON_TABLE = ** ON or OFF
-*DB2_INST.DFT_MON_UOW = ** ON or OFF
-*DB2_INST.DFT_MON_TIMESTAMP = ** ON or OFF
-*DB2_INST.DIAGLEVEL = ** 0 - 4
-*DB2_INST.DIAGPATH = ** BLANK or char(215)
-*DB2_INST.DIAGSIZE = ** A value specified in MB and limited by the available disk space in DIAGPATH. Minimum 2 MB must be specified.
-*DB2_INST.FENCED_POOL = -1 or AUTOMATIC ** -1(MAX_COORDAGENTS), AUTOMATIC or a number in range [0, 64000]
-*DB2_INST.INSTANCE_MEMORY = AUTOMATIC ** AUTOMATIC or a number in range [0, 1000000] for 32-bit and [0, 68719476736] for 64-bit
-*DB2_INST.HEALTH_MON = ** default is ON; ON or OFF
-*DB2_INST.MAX_CONNECTIONS = -1 or AUTOMATIC ** -1, AUTOMATIC or [1, 64000]
-*DB2_INST.FED_NOAUTH = NO ** YES or NO, default is NO
-*DB2_INST.DIR_CACHE = ** YES or NO
-*DB2_INST.DISCOVER = ** DISABLE, KNOWN or SEARCH
-*DB2_INST.DISCOVER_COMM = ** BLANK or TCPIP
-*DB2_INST.DISCOVER_INST = ** ENABLE or DISABLE
-*DB2_INST.FCM_NUM_ANCHORS = ** -1 or 128 - FCM_NUM_RQB
-*DB2_INST.FCM_NUM_BUFFERS = ** 128 - 65300
-*DB2_INST.FCM_NUM_CONNECT = ** -1 or 128 - FCM_NUM_RQB
-*DB2_INST.FCM_NUM_RQB = ** 128 - 120000
-*DB2_INST.INDEXREC = ** ACCESS or RESTART
-*DB2_INST.INTRA_PARALLEL = NO ** SYSTEM, YES or NO
-*DB2_INST.JAVA_HEAP_SZ = ** 0 - 4096
-*DB2_INST.JDK_PATH = ** BLANK or char(255)
-*DB2_INST.SSL_SVR_KEYDB = ** BLANK or char(1023)
-*DB2_INST.SSL_SVR_STASH = ** BLANK or char(1023)
-*DB2_INST.SSL_SVR_LABEL = ** BLANK or char(1023)
-*DB2_INST.SSL_SVCENAME = ** BLANK or char(14)
-*DB2_INST.SSL_CIPHERSPECS = ** BLANK or char(255)
-*DB2_INST.SSL_VERSIONS = ** BLANK or char(255)
-*DB2_INST.SSL_CLNT_KEYDB = ** BLANK or char(1023)
-*DB2_INST.SSL_CLNT_STASH = ** BLANK or char(1023)
-*DB2_INST.ALTERNATE_AUTH_ENC = ** NOT_SPECIFIED, AES_ONLY, AES_CMP
-*DB2_INST.KEEPDARI = ** YES or NO
-*DB2_INST.MAXAGENTS = ** 1 - 64000
-*DB2_INST.MAXCAGENTS = ** -1 or 1 - MAX_COORDAGENTS
-*DB2_INST.MAXDARI = ** -1 or 1 - MAX_COORDAGENTS
-*DB2_INST.MAXTOTFILOP = ** 100 - 32768
-*DB2_INST.MAX_CONNRETRIES = ** 0 - 100
-*DB2_INST.MAX_COORDAGENTS = 200 or AUTOMATIC ** 200, AUTOMATIC, -1 or 0 - 64000, -1 translates into a value of 200
-*DB2_INST.MAX_TIME_DIFF = 300 ** 1-1440. The unit of measurement is second
-*DB2_INST.MAX_QUERYDEGREE = ** ANY, -1 or 1 - 32767
-*DB2_INST.MON_HEAP_SZ = AUTOMATIC ** AUTOMATIC or 0 - 60000
-DB2_INST.NUMDB = 64 ** 1 - 256
-*DB2_INST.NUM_INITAGENTS = 0 ** 0 - 64000
-*DB2_INST.NUM_INITDARIS = ** 0 - MAXDARI
-*DB2_INST.NUM_INITFENCED = 0 ** 0 - 64000
-*DB2_INST.NUM_POOLAGENTS = 100 or AUTOMATIC ** -1, AUTOMATIC or 0 - 64000
-*DB2_INST.QUERY_HEAP_SZ = ** 2 - 524288
-*DB2_INST.RESTBUFSZ = ** 16 - 524288
-*DB2_INST.RESYNC_INTERVAL = ** 1 - 60000
-*DB2_INST.ROUTE_OBJ_NAME = ** BLANK or char(255)
-*DB2_INST.RQRIOBLK = ** 4096 - 65535
-*DB2_INST.SHEAPTHRES = ** 250 - 2097152
-*DB2_INST.SPM_LOG_FILE_SZ = ** 4 - 1000
-*DB2_INST.SPM_LOG_PATH = ** BLANK or char(226)
-*DB2_INST.SPM_MAX_RESYNC = ** 10 - 256
-*DB2_INST.SPM_NAME = ** BLANK or char(8)
-*DB2_INST.START_STOP_TIME = ** 1 - 1440
-*DB2_INST.SYSADM_GROUP = ** BLANK or char(30)
-*DB2_INST.SYSCTRL_GROUP = ** BLANK or char(30)
-*DB2_INST.SYSMAINT_GROUP = ** BLANK or char(30)
-*DB2_INST.TP_MON_NAME = ** BLANK or char(19)
-*DB2_INST.TRUST_ALLCLNTS = ** YES, NO or DRDAONLY
-*DB2_INST.TRUST_CLNTAUTH = ** CLIENT or SERVER
-*DB2_INST.UDF_MEM_SZ = ** 128 - 60000
-*DB2_INST.FCM_NUM_CHANNELS = ** 128, 524288
-*DB2_INST.FEDERATED_ASYNC = 0 ** ANY or 0 - 32767
-
-** Instance Profile Registry Settings
-** ----------------------------------
-*DB2_INST.DB2ACCOUNT = ** BLANK or char(199)
-*DB2_INST.DB2ATLD_PORTS = ** BLANK or 1-65535:1-65535 n1<=n2
-*DB2_INST.DB2BIDI = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2BQTIME = ** BLANK or 1 - MAX
-*DB2_INST.DB2BQTRY = ** BLANK or 0 - MAX
-*DB2_INST.DB2CHKPTR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2CLIINIPATH = ** BLANK or char(260)
-*DB2_INST.DB2CODEPAGE = ** BLANK or 0 - MAX
-*DB2_INST.DB2CONNECT_IN_APP_PROCESS = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2COUNTRY = ** BLANK or 1 - 999
-*DB2_INST.DB2DBDFT = ** BLANK or char(8)
-*DB2_INST.DB2DEFPREP = ** BLANK, ALL, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2ENVLIST = ** BLANK or char()
-*DB2_INST.DB2INCLUDE = ** BLANK or char()
-*DB2_INST.DB2IQTIME = ** BLANK or 1 - MAX
-*DB2_INST.DB2LIBPATH = ** BLANK or char()
-*DB2_INST.DB2LOADREC = ** BLANK or char(260)
-*DB2_INST.DB2LOCK_TO_RB = ** BLANK or STATEMENT
-*DB2_INST.DB2NOEXITLIST = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2OLDEVMON = ** BLANK or char()
-*DB2_INST.DB2OPTIONS = ** BLANK or -/+[a,c,e[c,s],n,o,p,s,t,v,w,x] and/or -[f,l,r,z]filename
-*DB2_INST.DB2_OPTSTATS_LOG = ** OFF or ON with parameters {NUM | SIZE | NAME | DIR}
-*DB2_INST.DB2PRIORITIES = ** BLANK or char()
-*DB2_INST.DB2RQTIME = ** BLANK or 1 - MAX
-*DB2_INST.DB2_SET_MAX_CONTAINER_SIZE = ** -1 (no limit) or any integer greater than 64MB
-*DB2_INST.DB2SORT = ** BLANK or char(260)
-*DB2_INST.DB2_SYSTEM_MONITOR_SETTINGS = ** Controls parameters OLD_CPU_USAGE and DISABLE_CPU_USAGE with ON or OFF values
-*DB2_INST.DB2_AVOID_PREFETCH = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2_CORRELATED_PREDICATES = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2_FORCE_NLS_CACHE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2_HASH_JOIN = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2_INDEX_FREE = ** BLANK or 0 - 60
-*DB2_INST.DB2_LIKE_VARCHAR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T, F or 0.0 - 5.0 (exclusive)
-*DB2_INST.DB2_LOADSORT_STACKSZ = ** BLANK or 1 - MAX
-*DB2_INST.DB2_NO_PKG_LOCK = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2_NUM_FAILOVER_NODES = ** BLANK or 0 - 999
-*DB2_INST.DB2_PARALLEL_IO = ** BLANK, * or 0-4095,0-4095,...
-*DB2_INST.DB2_PRED_FACTORIZE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2_SORT_AFTER_TQ = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2_STRIPED_CONTAINERS = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_INST.DB2INSTOWNER = ** BLANK or char(30)
-*DB2_INST.DB2DBMSADDR = ** BLANK or char(10)
-*DB2_INST.DB2_DISABLE_FLUSH_LOG = ** BLANK or ON, OFF
-*DB2_INST.DB2LOCALE = ** BLANK or YES, NO
-*DB2_INST.DB2NODE = ** BLANK or YES NO
-*DB2_INST.DB2_USE_PAGE_CONTAINER_TAG = ** BLANK or ON
-*DB2_INST.DB2TCPCONNMGRS = ** BLANK or 1 - 8
-*DB2_INST.DB2_PARTITIONEDLOAD_DEFAULT = ** BLANK or YES, NO
-*DB2_INST.DB2_INLIST_TO_NLJN = ** BLANK or YES, NO
-*DB2_INST.DB2_SELECTIVITY = ** BLANK or YES, NO
-*DB2_INST.DB2_REDUCED_OPTIMIZATION = ** BLANK, DISABLE, YES, NO, 0 - MAX
-*DB2_INST.DB2_BINSORT = ** BLANK or YES, NO
-*DB2_INST.DB2BPVARS = ** BLANK or char()
-*DB2_INST.DB2_ENABLE_BUFPD = ** BLANK or ON, OFF
-*DB2_INST.DB2_EVMON_EVENT_LIST_SIZE = 0 ** A value specified in KB, MB or GB and limited by the available memory from the monitor heap
-*DB2_INST.DB2_EXTENDED_OPTIMIZATION = ** BLANK or ON, OFF
-*DB2_INST.DB2FODC = Concatenation of all FODC parameters: CORELIMIT, DUMPCORE, DUMDIR, MEMSCAN and SERVICELEVEL ** CORELIMIT, DUMPCORE, DUMPDIR and MEMSCAN parameters are set different for Unix and Windows
-*DB2_INST.DB2MAXFSCRSEARCH = ** BLANK or -1, 1 - 33554
-*DB2_INST.DB2MEMDISCLAIM = ** BLANK or YES, NO
-*DB2_INST.DB2_VENDOR_INI = ** BLANK or char()
-*DB2_INST.DB2_XBSA_LIBRARY = ** BLANK or char()
-*DB2_INST.DB2LDAP_SEARCH_SCOPE = ** BLANK LOCAL DOMAIN GLOBAL
-*DB2_INST.DB2MEMMAXFREE = ** BLANK or char()
-*DB2_INST.DB2NTMEMSIZE = ** BLANK or char()
-*DB2_INST.DB2_OVERRIDE_BPF = ** BLANK or 1 - MAX
-*DB2_INST.DB2_DJ_COMM = ** BLANK or char()
-*DB2_INST.DB2ADMINSERVER = ** BLANK or char(64)
-*DB2_INST.DB2_PINNED_BP = NO ** YES or NO
-*DB2_INST.DB2REMOTEPREG = ** BLANK or char(64)
-*DB2_INST.DB2_ANTIJOIN = ** BLANK or YES, NO, EXTEND
-*DB2_INST.DB2_COLLECT_TS_REC_INFO = ** BLANK or YES, NO
-*DB2_INST.DB2PROCESSORS = ** BLANK or 1 - MAX
-*DB2_INST.DB2ASSUMEUPDATE = ** BLANK or ON, OFF
-*DB2_INST.DB2_SKIPDELETED = ** BLANK or ON, OFF
-*DB2_INST.DB2_SQLROUTINE_PREPOPTS = ** BLANK or char()
-*DB2_INST.DB2_INDEX_TYPE2 = ** BLANK or ON, OFF
-*DB2_INST.DB2_APM_PERFORMANCE = ** BLANK or ON, OFF
-*DB2_INST.DB2_FMP_COMM_HEAPSZ = ** BLANK or 1 - MAX
-*DB2_INST.DB2_EVALUNCOMMITTED = ** BLANK or YES, NO
-*DB2_INST.DB2_NO_FORK_CHECK = ** BLANK or ON, OFF
-*DB2_INST.DB2_KEEPTABLELOCK = ** BLANK or ON, OFF
-*DB2_INST.DB2GRAPHICUNICODESERVER = ** BLANK or ON, OFF
-*DB2_INST.DB2_MINIMIZE_LISTPREFETCH = ** BLANK or YES, NO
-*DB2_INST.DB2_TRUSTED_BINDIN = ** BLANK or ON, OFF, CHECK
-*DB2_INST.DB2_CLPPROMPT = ** BLANK or char(99)
-*DB2_INST.DB2_FORCE_APP_ON_MAX_LOG = ** BLANK or TRUE, FALSE
-*DB2_INST.DB2_CLP_EDITOR = ** BLANK or char()
-*DB2_INST.DB2_CLP_HISTSIZE = ** BLANK or 1 - 500
-*DB2_INST.DB2_LOAD_COPY_NO_OVERRIDE = ** BLANK or LOCAL, DOMAIN, GLOBAL
-*DB2_INST.DB2_MAX_NON_TABLE_LOCKS = ** BLANK or 1 - MAX
-*DB2_INST.DB2_USE_ALTERNATE_PAGE_CLEANING = ** BLANK or ON, OFF
-*DB2_INST.DB2_SCATTERED_IO = ** BLANK or ON, OFF
-*DB2_INST.DB2_NO_MPFA_FOR_NEW_DB = ** BLANK or YES, NO
-*DB2_INST.DB2_OBJECT_TABLE_ENTRIES = ** BLANK or 0 - 50000
-*DB2_INST.DB2_VIEW_REOPT_VALUES = ** BLANK or YES, NO
-*DB2_INST.DB2_SELUDI_COMM_BUFFER = ** BLANK or ON, OFF
-*DB2_INST.DB2_ENABLE_AUTOCONFIG_DEFAULT = ** BLANK, YES, NO
-*DB2_INST.DB2_OPT_MAX_TEMP_SIZE = ** BLANK or 0 - MAX
-*DB2_INST.DB2RCMD_LEGACY_MODE = ** YES, ON, TRUE, 1 or NO, OFF, FALSE, 0
-*DB2_INST.DB2_LARGE_PAGE_MEM = ** *, DB
-*DB2_INST.DB2_MAX_LOB_BLOCK_SIZE = 0 ** 0 - 21487483647
-*DB2_INST.DB2RSHCMD = rsh ** Values are a full path name to rsh, or ssh
-*DB2_INST.DB2AUTH = ** BLANK or char()
-*DB2_INST.DB2CONNECT_DISCONNECT_ON_INTERRUPT = NO ** YES, TRUE, 1 or NO, FALSE, 0
-*DB2_INST.DB2CONNECT_ENABLE_EURO_CODEPAGE = ** BLANK or char()
-*DB2_INST.DB2FCMCOMM = TCPIP4 ** TCPIP4 or TCPIP6
-*DB2_INST.DB2FFDC = ** BLANK, ON, CORE:OFF
-*DB2_INST.DB2LOADFLAGS = ** BLANK or char()
-*DB2_INST.DB2RSHTIMEOUT = 30 ** 1 - 120
-*DB2_INST.DB2TCP_CLIENT_CONTIMEOUT = 0 ** 0 - 32767
-*DB2_INST.DB2TCP_CLIENT_RCVTIMEOUT = 0 ** 0 - 32767
-*DB2_INST.DB2TRC_DEF_BUFFSIZE = ** BLANK or char()
-*DB2_INST.DB2YIELD = ** BLANK or char()
-*DB2_INST.DB2_ASYNC_IO_MAXFILOP = MAXFILOP ** MAXFILOP - MAX
-*DB2_INST.DB2_BAR_AUTONOMIC_DISABLE = ** BLANK or char()
-*DB2_INST.DB2_CONNRETRIES_INTERVAL = ** BLANK or char()
-*DB2_INST.DB2_DXX_PATHS_ALLOWED_READ = ** BLANK or char()
-*DB2_INST.DB2_DXX_PATHS_ALLOWED_WRITE = ** BLANK or char()
-*DB2_INST.DB2_HADR_BUF_SIZE = 2*LOGBUFSZ ** BLANK or 0 - MAX
-*DB2_INST.DB2_LOGGING_DETAIL = ** BLANK or char()
-*DB2_INST.DB2_MAP_XML_AS_CLOB_FOR_DLC = NO ** YES, NO
-*DB2_INST.DB2_MAX_CLIENT_CONNRETRIES = ** BLANK or char()
-*DB2_INST.DB2_MAX_INACT_STMTS = ** 0 - 4294967296
-*DB2_INST.DB2_MDC_ROLLOUT = IMMEDIATE ** DEFER, IMMEDIATE or OFF
-*DB2_INST.DB2_MINIMUM_CLIENT_LEVEL = ** BLANK or char()
-*DB2_INST.DB2_NUM_CKPW_DAEMONS = 3 ** 0 - 100
-*DB2_INST.DB2_RESOURCE_POLICY = ** valid path to configuration file
-*DB2_INST.DB2_SKIPINSERTED = OFF ** ON, OFF
-*DB2_INST.DB2_SMS_TRUNC_TMPTABLE_THRESH = ** -1, 0-n where n is the number of extents per container that are to be maintained
-*DB2_INST.DB2_SNAPSHOT_NOAUTH = ** BLANK or char()
-*DB2_INST.DB2_TAPEMGR_TAPE_EXPIRATION = ** BLANK or char()
-*DB2_INST.DB2_UPDDBCFG_SINGLE_DBPARTITION = ** YES, 1, TRUE or NO, 0, FALSE
-*DB2_INST.DB2_USE_DB2JCCT2_JROUTINE = ** ON, YES, 1, TRUE or OFF, NO, 0, FALSE
-*DB2_INST.DB2_UTIL_MSGPATH = instanceName/tmp directory ** BLANK or char()
-*DB2_INST.DB2_WORKLOAD = Not set ** BLANK, SAP
-
-** 2nd (non-pureScale) Instance Creation Settings
-** ----------------------------------------------
-** Multiple (non-pureScale) DB2 instances can be created in the same
-** installation. This section shows how to specify the 2nd instance in the rsp
-** file. Note: Only a subset of the instance keywords are listed below. You can
-** specify other instance related keywords similar as the 1st instance. All
-** keywords in this section are commented out. By default, only one instance
-** will be created during the install.
-
-** Prefix name of this instance set. Its value is used by all keywords for the
-** same instance.
-*INSTANCE = DB2_INS2 ** char(8) no spaces
-*DB2_INS2.NAME = db2inst2 ** char(8) no spaces, no upper case letters
-
-** Use a generated UID if no value provided - highly recommended.
-*DB2_INS2.UID = ** Unsigned integer
-*DB2_INS2.GROUP_NAME = db2iadm1 ** char(30) no spaces
-
-** Use a generated GID if no value provided - highly recommended.
-*DB2_INS2.GID = ** Unsigned integer
-*DB2_INS2.HOME_DIRECTORY = ** char(64) no spaces. Valid for root install only
-*DB2_INS2.PASSWORD = Replace with your password ** Valid for root install only
-
-** Administration Server Creation Settings
-** ---------------------------------------
-** Valid for root installation only. User IDs managed by NIS/NIS+ are not
-** supported. If an existing ID is used, make sure it is not locked and its
-** password has not expired.
-*DAS_USERNAME = ** char(8) no spaces, no upper case letters
-*DAS_UID = ** use db2 generated UID if no values provided(highly recommended) OR a valid unsign int
-*DAS_GROUP_NAME = ** char(30) no spaces
-*DAS_GID = ** use db2 generated GID if no values provided(highly recommended) OR a valid unsign int
-*DAS_HOME_DIRECTORY = ** char(64) no spaces
-*DAS_PASSWORD = ** char(8)
-*DAS_SMTP_SERVER = ** char(64) no spaces
-
-** Global Profile Registry Settings
-** --------------------------------
-*DB2ACCOUNT = ** BLANK or char(199)
-*DB2ATLD_PORTS = ** BLANK or 1-65535:1-65535 n1<=n2
-*DB2BIDI = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2BQTIME = ** BLANK or 1 - MAX
-*DB2BQTRY = ** BLANK or 0 - MAX
-*DB2CHGPWD_EEE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2CHKPTR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2CLIINIPATH = ** BLANK or char(260)
-*DB2CODEPAGE = ** BLANK or 0 - MAX
-*DB2COMM = ** BLANK or TCPIP
-*DB2COUNTRY = ** BLANK or 1 - 999
-*DB2DBDFT = ** BLANK or char(8)
-*DB2DEFPREP = ** BLANK, ALL, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2ENVLIST = ** BLANK or char()
-*DB2IQTIME = ** BLANK or 1 - MAX
-*DB2LDAPCACHE = ** YES or NO
-*DB2LDAPHOST = ** BLANK or char()
-*DB2LDAP_BASEDN = ** BLANK or char()
-*DB2LDAP_CLIENT_PROVIDER = ** BLANK, MICROSOFT or IBM
-*DB2LIBPATH = ** BLANK or char()
-*DB2LOADREC = ** BLANK or char(1023)
-*DB2LOCK_TO_RB = ** BLANK or STATEMENT
-*DB2NOEXITLIST = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2OLDEVMON = ** BLANK or char()
-*DB2OPTIONS = ** BLANK or -/+[a,c,e[c,s],n,o,p,s,t,v,w,x] and/or -[f,l,r,z]filename
-*DB2_OPTSTATS_LOG = ** OFF or ON with parameters {NUM | SIZE | NAME | DIR}
-*DB2PRIORITIES = ** BLANK or char()
-*DB2RQTIME = ** BLANK or 1 - MAX
-*DB2_SET_MAX_CONTAINER_SIZE = ** -1 (no limit) or any integer greater than 64MB
-*DB2SORT = ** BLANK or char(1023)
-*DB2SYSTEM = ** char(64)
-*DB2_SYSTEM_MONITOR_SETTINGS = ** Controls parameters OLD_CPU_USAGE and DISABLE_CPU_USAGE with ON or OFF values
-*DB2_ENABLE_LDAP = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_FORCE_NLS_CACHE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2_NUM_FAILOVER_NODES = ** BLANK or 0 - 999
-*DB2_SORT_AFTER_TQ = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F
-*DB2INSTOWNER = ** BLANK or char(30)
-*DB2DBMSADDR = ** BLANK or char(10)
-*DB2_DISABLE_FLUSH_LOG = ** BLANK or ON, OFF
-*DB2_LIC_STAT_SIZE = ** BLANK or 0 - 32767
-*DB2LOCALE = ** BLANK or YES, NO
-*DB2NODE = ** BLANK or YES NO
-*DB2_USE_PAGE_CONTAINER_TAG = ** BLANK or ON
-*DB2TCPCONNMGRS = ** BLANK or 1 - 8
-*DB2_PARTITIONEDLOAD_DEFAULT = ** BLANK or YES, NO
-*DB2_INLIST_TO_NLJN = ** BLANK or YES, NO
-*DB2_SELECTIVITY = ** BLANK or YES, NO
-*DB2_REDUCED_OPTIMIZATION = ** BLANK, DISABLE, YES, NO, 0 - MAX
-*DB2_BINSORT = ** BLANK or YES, NO
-*DB2BPVARS = ** BLANK or char()
-*DB2_ENABLE_BUFPD = ** BLANK or ON, OFF
-*DB2_EVMON_EVENT_LIST_SIZE = 0 ** A value specified in KB, MB or GB but limited by the available memory from the monitor heap
-*DB2_EXTENDED_OPTIMIZATION = ** BLANK or ON, OFF
-*DB2FODC = Concatenation of all FODC parameters: CORELIMIT, DUMPCORE, DUMDIR and MEMSCAN; and their values ** CORELIMIT, DUMPCORE, DUMPDIR and MEMSCAN parameters are set different for Unix and Windows
-*DB2MAXFSCRSEARCH = ** BLANK or -1, 1 - 33554
-*DB2MEMDISCLAIM = ** BLANK or YES, NO
-*DB2_VENDOR_INI = ** BLANK or char()
-*DB2_XBSA_LIBRARY = ** BLANK or char()
-*DB2LDAP_SEARCH_SCOPE = ** BLANK LOCAL DOMAIN GLOBAL
-*DB2MEMMAXFREE = ** BLANK or char()
-*DB2NTMEMSIZE = ** BLANK or char()
-*DB2_OVERRIDE_BPF = ** BLANK or 1 - MAX
-*DB2_DJ_COMM = ** BLANK or char()
-*DB2ADMINSERVER = ** BLANK or char(64)
-*DB2_PINNED_BP = NO ** YES or NO
-*DB2REMOTEPREG = ** BLANK or char(64)
-*DB2_ANTIJOIN = ** BLANK or YES, NO, EXTEND
-*DB2_COLLECT_TS_REC_INFO = ** BLANK or YES, NO
-*DB2PROCESSORS = ** BLANK or 1 - MAX
-*DB2ASSUMEUPDATE = ** BLANK or ON, OFF
-*DB2_SKIPDELETED = ** BLANK or ON, OFF
-*DB2_SQLROUTINE_PREPOPTS = ** BLANK or char()
-*DB2_INDEX_TYPE2 = ** BLANK or ON, OFF
-*DB2_APM_PERFORMANCE = ** BLANK or ON, OFF
-*DB2_FMP_COMM_HEAPSZ = ** BLANK or 1 - MAX
-*DB2_EVALUNCOMMITTED = ** BLANK or YES, NO
-*DB2_NO_FORK_CHECK = ** BLANK or ON, OFF
-*DB2_KEEPTABLELOCK = ** BLANK or ON, OFF
-*DB2GRAPHICUNICODESERVER = ** BLANK or ON, OFF
-*DB2_MINIMIZE_LISTPREFETCH = ** BLANK or YES, NO
-*DB2_TRUSTED_BINDIN = ** BLANK or ON, OFF, CHECK
-*DB2_CLPPROMPT = ** BLANK or char(99)
-*DB2_FORCE_APP_ON_MAX_LOG = ** BLANK or TRUE, FALSE
-*DB2_CLP_EDITOR = ** BLANK or char()
-*DB2_CLP_HISTSIZE = ** BLANK or 1 - 500
-*DB2_LOAD_COPY_NO_OVERRIDE = ** BLANK or LOCAL, DOMAIN, GLOBAL
-*DB2_MAX_NON_TABLE_LOCKS = ** BLANK or 1 - MAX
-*DB2_USE_ALTERNATE_PAGE_CLEANING = ** BLANK or ON, OFF
-*DB2_SCATTERED_IO = ** BLANK or ON, OFF
-*DB2_NO_MPFA_FOR_NEW_DB = ** BLANK or YES, NO
-*DB2_OBJECT_TABLE_ENTRIES = ** BLANK or 0 - 50000
-*DB2_VIEW_REOPT_VALUES = ** BLANK or YES, NO
-*DB2_SELUDI_COMM_BUFFER = ** BLANK or ON, OFF
-*DB2_ENABLE_AUTOCONFIG_DEFAULT = ** BLANK, YES, NO
-*DB2_OPT_MAX_TEMP_SIZE = ** BLANK or 0 - MAX
-*DB2RCMD_LEGACY_MODE = ** YES, ON, TRUE, 1 or NO, OFF, FALSE, 0
-*DB2_LARGE_PAGE_MEM = ** *, DB
-*DB2_MAX_LOB_BLOCK_SIZE = 0 ** 0 - 21487483647
-*DB2RSHCMD = rsh ** Values are a full path name to rsh, or ssh
-*DB2AUTH = ** BLANK or char()
-*DB2CONNECT_DISCONNECT_ON_INTERRUPT = NO ** YES, TRUE, 1 or NO, FALSE, 0
-*DB2CONNECT_ENABLE_EURO_CODEPAGE = ** BLANK or char()
-*DB2FCMCOMM = TCPIP4 ** TCPIP4 or TCPIP6
-*DB2FFDC = ** BLANK, ON, CORE:OFF
-*DB2LOADFLAGS = ** BLANK or char()
-*DB2RSHTIMEOUT = 30 ** or 1 - 120
-*DB2TCP_CLIENT_CONTIMEOUT = 0 ** 0 - 32767
-*DB2TCP_CLIENT_RCVTIMEOUT = 0 ** 0 - 32767
-*DB2TRC_DEF_BUFFSIZE = ** BLANK or char()
-*DB2YIELD = ** BLANK or char()
-*DB2_ASYNC_IO_MAXFILOP = MAXFILOP ** MAXFILOP - MAX
-*DB2_BAR_AUTONOMIC_DISABLE = ** BLANK or char()
-*DB2_CONNRETRIES_INTERVAL = ** BLANK or char()
-*DB2_DXX_PATHS_ALLOWED_READ = ** BLANK or char()
-*DB2_DXX_PATHS_ALLOWED_WRITE = ** BLANK or char()
-*DB2_HADR_BUF_SIZE = 2*LOGBUFSZ ** BLANK or 0 - MAX
-*DB2_LOGGING_DETAIL = ** BLANK or char()
-*DB2_MAP_XML_AS_CLOB_FOR_DLC = NO ** YES, NO
-*DB2_MAX_CLIENT_CONNRETRIES = ** BLANK or char()
-*DB2_MAX_INACT_STMTS = ** 0 - 4294967296
-*DB2_MDC_ROLLOUT = IMMEDIATE ** DEFER, IMMEDIATE or OFF
-*DB2_MINIMUM_CLIENT_LEVEL = ** BLANK or char()
-*DB2_NUM_CKPW_DAEMONS = 3 ** 0 - 100
-*DB2_RESOURCE_POLICY = ** valid path to configuration file
-*DB2_SKIPINSERTED = OFF ** ON, OFF
-*DB2_SMS_TRUNC_TMPTABLE_THRESH = ** -1, 0-n where n is the number of extents per container that are to be maintained
-*DB2_SNAPSHOT_NOAUTH = ** BLANK or char()
-*DB2_TAPEMGR_TAPE_EXPIRATION = ** BLANK or char()
-*DB2_DJ_COMM = OFF ** ON or OFF
-*DB2_UPDDBCFG_SINGLE_DBPARTITION = ** YES, 1, TRUE or NO, 0, FALSE
-*DB2_USE_DB2JCCT2_JROUTINE = ** ON, YES, 1, TRUE or OFF, NO, 0, FALSE
-*DB2_UTIL_MSGPATH = instanceName/tmp directory ** BLANK or char()
-*DB2_WORKLOAD = Not set ** BLANK, SAP
-
-** Database Settings
-** -----------------
-*DATABASE = ** databas1: char(8) no spaces - this is the prefix for this DB set
-*databas1.DATABASE_NAME = ** favorateDB: char(8) no spaces - this is the real database
-*databas1.INSTANCE = ** db2inst1: char(8) no spaces - one value of INSTANCE keyword
-*databas1.ALIAS = ** alias of databas1: char(8) no spaces and can not start with SYS, DBM or IBM
-*databas1.LOCATION = ** local, remote, LOCAL or REMOTE; For client only product use remote or REMOTE
-*databas1.SYSTEM_NAME = ** some remote host char(64) no spaces: for LOCATION=remote only
-*databas1.AUTHENTICATION = ** CLIENT, SERVER, SERVER_ENCRYPT: optional
-*databas1.PATH = ** the directory for the database: optional
-*databas1.SVCENAME = ** service1: for remote LOCATION only
-*databas1.USERNAME = ** db2user: char(8) no spaces
-*databas1.PASSWORD = ** db2pwd: char(8) no spaces
-
-** Contact List Settings
-** ---------------------
-** Valid for root installation only
-*DAS_CONTACT_LIST = ** LOCAL or REMOTE
-*DAS_CONTACT_LIST_HOSTNAME = ** hostname for REMOTE CONTACT_LIST
-*DAS_CONTACT_LIST_USERNAME = ** contactL: char(8) no spaces
-*DAS_CONTACT_LIST_DOMAIN = ** contactLdomain: char(14)
-*DAS_CONTACT_LIST_PASSWORD = ** contactLpasswd: char(14)
-
-** Contact Information For Each Instance
-** -------------------------------------
-** Valid for root installation only
-*CONTACT = contact1 ** contact1, char(80)
-*contact1.NEW_CONTACT = YES ** YES or NO
-*contact1.CONTACT_NAME = ** userName
-*contact1.EMAIL = ** sysadmin@yourcompany.com - email address where the notification should be sent
-*contact1.PAGER = ** YES or NO
-*contact1.INSTANCE = ** DB2_INST - instance that this contact belongs to, this should be one of the values of keyword INSTANCE.
-
-** Information Center Settings
-** ---------------------------
-** The default location for accessing the DB2 documentation is the IBM website.
-** Only edit this section if you wish to access DB2 documentation from a
-** different location, such as your local computer or an intranet server.
-
-** The following DB2_DOCHOST keyword is used to specify where the Information
-** Center server is installed. For example, "localhost" for the local computer.
-*DB2_DOCHOST = ** Any valid hostname
-
-** The following DB2_DOCPORT keyword is used to specify the port number of the
-** Information Center server.
-*DB2_DOCPORT = ** 1024-65535
-
-** (Valid for root installation only) Tivoli SA MP
-** -----------------------------------------------
-** This keyword has been deprecated. The IBM Tivoli System Automation for
-** Multiplatforms Base Component (Tivoli SA MP) will be automatically installed
-** for you if you specified TYPICAL as the installation type. If an older
-** version of the Tivoli SA MP is already installed it will be updated to the
-** version on the DB2 installation media, if that update is supported. The
-** Tivoli SA MP will only be installed or updated if you have the proper
-** license.
-*INSTALL_TSAMP = NO ** YES or NO. This keyword is deprecated. Valid for root installation only.
-
-** (Valid for root installation only) Pacemaker
-** --------------------------------------------
-** The Pacemaker (PCMK) will be automatically installed for you if you
-** specified TYPICAL as the installation type. If an older version of the
-** Pacemaker is already installed it will be updated to the version on the Db2
-** installation media, if that update is supported.
-*INSTALL_PCMK = NO ** YES or NO. Valid for root installation only.
-
-** (Valid for root installation only) Global Secure ToolKit
-** --------------------------------------------------------
-** The Global Secure ToolKit will be automatically installed for you. If you
-** don't want to install it, set the value to NO.
-*INSTALL_ENCRYPTION = YES ** YES or NO.Valid for root installation only.
-
https://git.useribm.hu / user-lxc.git / commitdiff