From: Zoltán Felleg Date: Wed, 17 Dec 2025 19:29:10 +0000 (+0100) Subject: Updated db2.in (downgraded db2 to v11.5.9). X-Git-Url: http://git.useribm.hu/?a=commitdiff_plain;h=2f532728b5227b02efe90440d98f17e42be9f244;p=user-lxc.git Updated db2.in (downgraded db2 to v11.5.9). --- diff --git a/sources/db2.in/c3d/firstboot/data/db2server.rsp b/sources/db2.in/c3d/firstboot/data/db2server.rsp index 1a2933f..4fddc92 100644 --- a/sources/db2.in/c3d/firstboot/data/db2server.rsp +++ b/sources/db2.in/c3d/firstboot/data/db2server.rsp @@ -16,20 +16,20 @@ ** with two asterisks are documentation and should not be enabled. ** ** For more information on creating or configuring an ESE instance with the -** DB2 pureScale Feature, see "Installing the +** DB2 pureScale Feature, see "Installing the ** IBM DB2 pureScale feature for DB2 Server Edition ** using a response file" in the DB2 Information Center. -** For more information on configuration parameters, see "Configuring the DB2 database manager with +** For more information on configuration parameters, see "Configuring the DB2 database manager with ** configuration parameters" in the DB2 Information Center. ** -** For more information on DB2 registry and environment variables, and configuration +** For more information on DB2 registry and environment variables, and configuration ** parameters, see "DB2 registry and environment variables" in the DB2 Information Center. ** -** For more information on how to perform a response file installation, see +** For more information on how to perform a response file installation, see ** "Response file considerations" in the DB2 Information Center. ** ** Refer to the DB2 Information Center at: -** https://www-01.ibm.com/support/knowledgecenter/SSEPGG_12.1.1/com.ibm.db2.luw.kc.doc/welcome.html +** https://www-01.ibm.com/support/knowledgecenter/SSEPGG_11.5.9/com.ibm.db2.luw.kc.doc/welcome.html ** ** ============================================================================ ** General Options @@ -47,7 +47,7 @@ PROD = DB2_SERVER_EDITION ** installation. If not removed, its value must be $HOME/sqllib where $HOME ** represents the HOME directory of the non-root user ID that owns the non-root ** installation. -FILE = /opt/ibm/db2/V12.1 +FILE = /opt/ibm/db2/V11.5 ** Modify the value of the following LIC_AGREEMENT keyword to indicate that you ** have read and agreed to the license agreement file in the db2/license @@ -69,9 +69,9 @@ LIC_AGREEMENT = ACCEPT ** ACCEPT or DECLINE ** a TYPICAL or a COMPACT install type, no COMP keywords are required. In this ** case the installer will select the appropriate components for you. All COMP ** keywords are ignored by the installer unless the INSTALL_TYPE is set to -** CUSTOM. If you select the CUSTOM install type, then ensure that you enable +** CUSTOM. If you select the CUSTOM install type, then ensure that you enable ** all of the COMP keywords that are required for your database environment. -** +** ** Note: The install type is not related to the language selection. ** ---------------------------------------------------------------------------- INSTALL_TYPE = CUSTOM ** TYPICAL, COMPACT, CUSTOM @@ -81,6 +81,12 @@ INSTALL_TYPE = CUSTOM ** TYPICAL, COMPACT, CUSTOM ** your computer. ** ---------------------------------------------------------------------------- +** DB2 Advanced Copy Services help protect mission-critical data that requires +** 24x7 availability. It offers an integrated solution designed to implement +** high-efficiency backup and restore processes and helps eliminate +** backup-related performance issues. +*COMP = ACS ** Integrated Flash Copy Support + ** Provides federated support required to access DB2 for iSeries and DB2 for ** z/OS and OS/390 data sources. *COMP = DB2_DATA_SOURCE_SUPPORT ** DB2 data source support @@ -112,6 +118,14 @@ COMP = INSTANCE_SETUP_SUPPORT ** DB2 Instance ** integrated on Linux. *COMP = PCMK ** Pacemaker +** IBM Tivoli System Automation for Multiplatforms provides high availability +** and disaster recovery capabilities for AIX, Linux, Solaris SPARC, and +** Windows. +** If this component is selected, it will either be installed, updated or +** upgraded by the DB2 installer. Use COMP=TSAMP only if you are running as +** root user. +*COMP = TSAMP ** Tivoli SA MP + ** The following components are not part of TYPICAL installations, and thus can ** only be installed through CUSTOM installs. @@ -217,7 +231,7 @@ COMP = ODBC_DATA_SOURCE_SUPPORT ** ODBC data sou ** (Valid for non-root upgrade only) Upgrade Older Release ** ------------------------------------------------------- -** Specify whether you want to upgrade any previous versions of the product. +** Specify whether you want to upgrade any previous versions of the product. ** Specifying this keyword will remove any previous version and upgrade any ** settings to the new installation. Be aware that during upgrade of the ** current copy, only the product specified in the response file will be @@ -380,6 +394,16 @@ DB2_INST.PORT_NUMBER = 50000 ** 1024 - 65535, Reserved for root i ** the IBM DB2 pureScale implementation. *DB2_INST.DB2SSHID_USERNAME = ** char(8) no spaces, no upper case letters +** Tivoli SA MP Tiebreaker Settings (IBM DB2 pureScale Feature only) +** ----------------------------------------------------------------- +** The DB2_CLUSTER_SERVICES_TIEBREAKER_DEVICE_PATH keyword is used to specify +** the device path for Tivoli SA MP Tiebreaker setup. The keyword is mandatory +** when setting up the first IBM DB2 pureScale instance. + +** All the hosts specified in HOST section must have direct access to this +** disk. +*DB2_CLUSTER_SERVICES_TIEBREAKER_DEVICE_PATH = ** a valid device path, for example, /dev/sda + ** Shared File System Settings (IBM DB2 pureScale Feature only) ** ------------------------------------------------------------ ** Only one of the following two keywords is needed when setting up the first @@ -662,6 +686,7 @@ DB2_INST.NUMDB = 64 ** 1 - 256 *DB2_INST.DB2_SKIPINSERTED = OFF ** ON, OFF *DB2_INST.DB2_SMS_TRUNC_TMPTABLE_THRESH = ** -1, 0-n where n is the number of extents per container that are to be maintained *DB2_INST.DB2_SNAPSHOT_NOAUTH = ** BLANK or char() +*DB2_INST.DB2_TAPEMGR_TAPE_EXPIRATION = ** BLANK or char() *DB2_INST.DB2_UPDDBCFG_SINGLE_DBPARTITION = ** YES, 1, TRUE or NO, 0, FALSE *DB2_INST.DB2_USE_DB2JCCT2_JROUTINE = ** ON, YES, 1, TRUE or OFF, NO, 0, FALSE *DB2_INST.DB2_UTIL_MSGPATH = instanceName/tmp directory ** BLANK or char() @@ -690,6 +715,19 @@ DB2_INST.NUMDB = 64 ** 1 - 256 *DB2_INS2.HOME_DIRECTORY = ** char(64) no spaces. Valid for root install only *DB2_INS2.PASSWORD = Replace with your password ** Valid for root install only +** Administration Server Creation Settings +** --------------------------------------- +** Valid for root installation only. User IDs managed by NIS/NIS+ are not +** supported. If an existing ID is used, make sure it is not locked and its +** password has not expired. +*DAS_USERNAME = ** char(8) no spaces, no upper case letters +*DAS_UID = ** use db2 generated UID if no values provided(highly recommended) OR a valid unsign int +*DAS_GROUP_NAME = ** char(30) no spaces +*DAS_GID = ** use db2 generated GID if no values provided(highly recommended) OR a valid unsign int +*DAS_HOME_DIRECTORY = ** char(64) no spaces +*DAS_PASSWORD = ** char(8) +*DAS_SMTP_SERVER = ** char(64) no spaces + ** Global Profile Registry Settings ** -------------------------------- *DB2ACCOUNT = ** BLANK or char(199) @@ -722,6 +760,7 @@ DB2_INST.NUMDB = 64 ** 1 - 256 *DB2RQTIME = ** BLANK or 1 - MAX *DB2_SET_MAX_CONTAINER_SIZE = ** -1 (no limit) or any integer greater than 64MB *DB2SORT = ** BLANK or char(1023) +*DB2SYSTEM = ** char(64) *DB2_SYSTEM_MONITOR_SETTINGS = ** Controls parameters OLD_CPU_USAGE and DISABLE_CPU_USAGE with ON or OFF values *DB2_ENABLE_LDAP = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_FORCE_NLS_CACHE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F @@ -818,6 +857,7 @@ DB2_INST.NUMDB = 64 ** 1 - 256 *DB2_SKIPINSERTED = OFF ** ON, OFF *DB2_SMS_TRUNC_TMPTABLE_THRESH = ** -1, 0-n where n is the number of extents per container that are to be maintained *DB2_SNAPSHOT_NOAUTH = ** BLANK or char() +*DB2_TAPEMGR_TAPE_EXPIRATION = ** BLANK or char() *DB2_DJ_COMM = OFF ** ON or OFF *DB2_UPDDBCFG_SINGLE_DBPARTITION = ** YES, 1, TRUE or NO, 0, FALSE *DB2_USE_DB2JCCT2_JROUTINE = ** ON, YES, 1, TRUE or OFF, NO, 0, FALSE @@ -838,6 +878,25 @@ DB2_INST.NUMDB = 64 ** 1 - 256 *databas1.USERNAME = ** db2user: char(8) no spaces *databas1.PASSWORD = ** db2pwd: char(8) no spaces +** Contact List Settings +** --------------------- +** Valid for root installation only +*DAS_CONTACT_LIST = ** LOCAL or REMOTE +*DAS_CONTACT_LIST_HOSTNAME = ** hostname for REMOTE CONTACT_LIST +*DAS_CONTACT_LIST_USERNAME = ** contactL: char(8) no spaces +*DAS_CONTACT_LIST_DOMAIN = ** contactLdomain: char(14) +*DAS_CONTACT_LIST_PASSWORD = ** contactLpasswd: char(14) + +** Contact Information For Each Instance +** ------------------------------------- +** Valid for root installation only +*CONTACT = contact1 ** contact1, char(80) +*contact1.NEW_CONTACT = YES ** YES or NO +*contact1.CONTACT_NAME = ** userName +*contact1.EMAIL = ** sysadmin@yourcompany.com - email address where the notification should be sent +*contact1.PAGER = ** YES or NO +*contact1.INSTANCE = ** DB2_INST - instance that this contact belongs to, this should be one of the values of keyword INSTANCE. + ** Information Center Settings ** --------------------------- ** The default location for accessing the DB2 documentation is the IBM website. @@ -852,6 +911,17 @@ DB2_INST.NUMDB = 64 ** 1 - 256 ** Information Center server. *DB2_DOCPORT = ** 1024-65535 +** (Valid for root installation only) Tivoli SA MP +** ----------------------------------------------- +** This keyword has been deprecated. The IBM Tivoli System Automation for +** Multiplatforms Base Component (Tivoli SA MP) will be automatically installed +** for you if you specified TYPICAL as the installation type. If an older +** version of the Tivoli SA MP is already installed it will be updated to the +** version on the DB2 installation media, if that update is supported. The +** Tivoli SA MP will only be installed or updated if you have the proper +** license. +*INSTALL_TSAMP = NO ** YES or NO. This keyword is deprecated. Valid for root installation only. + ** (Valid for root installation only) Pacemaker ** -------------------------------------------- ** The Pacemaker (PCMK) will be automatically installed for you if you diff --git a/sources/db2.in/c3d/firstboot/data/db2server.rsp.11.5.9 b/sources/db2.in/c3d/firstboot/data/db2server.rsp.11.5.9 deleted file mode 100644 index de16042..0000000 --- a/sources/db2.in/c3d/firstboot/data/db2server.rsp.11.5.9 +++ /dev/null @@ -1,938 +0,0 @@ -** ============================================================================ -** -** Sample response file for IBM DB2 -** -------------------------------- -** To select features and settings to install, uncomment the corresponding -** keywords and specify values for those keywords. You do not need to select -** features if you select the TYPICAL or COMPACT installation options. -** -** Comments are made by placing either an asterisk (*) or a hash symbol (#) at -** the start of a line, or by placing ** or ## after the start of a line to -** comment out the rest of that line. -** All keywords that are currently uncommented (not preceded by * or #) are -** mandatory and must be assigned values for the installation to continue. -** All other keywords are optional. If optional keywords are not specified, -** the installation will proceed using default values. Lines that start out -** with two asterisks are documentation and should not be enabled. -** -** For more information on creating or configuring an ESE instance with the -** DB2 pureScale Feature, see "Installing the -** IBM DB2 pureScale feature for DB2 Server Edition -** using a response file" in the DB2 Information Center. -** For more information on configuration parameters, see "Configuring the DB2 database manager with -** configuration parameters" in the DB2 Information Center. -** -** For more information on DB2 registry and environment variables, and configuration -** parameters, see "DB2 registry and environment variables" in the DB2 Information Center. -** -** For more information on how to perform a response file installation, see -** "Response file considerations" in the DB2 Information Center. -** -** Refer to the DB2 Information Center at: -** https://www-01.ibm.com/support/knowledgecenter/SSEPGG_12.1.1/com.ibm.db2.luw.kc.doc/welcome.html -** -** ============================================================================ -** General Options -** --------------- - -** Only one product can be specified for the following PROD keyword. Specifying -** multiple products in an installation is not supported. -PROD = DB2_SERVER_EDITION - -** The FILE keyword determines the base installation path. If you specify a -** path that does not yet have this product, this will install a new copy. If -** you specify a path that has this product, this will be considered an -** existing installation intended to install additional functionality. This is -** a mandatory keyword for root installation. Remove this keyword for non-root -** installation. If not removed, its value must be $HOME/sqllib where $HOME -** represents the HOME directory of the non-root user ID that owns the non-root -** installation. -FILE = /opt/ibm/db2/V12.1 - -** Modify the value of the following LIC_AGREEMENT keyword to indicate that you -** have read and agreed to the license agreement file in the db2/license -** directory. -LIC_AGREEMENT = ACCEPT ** ACCEPT or DECLINE - -** If an interactive type is set, db2setup will prompt for CD locations and -** give feedback as to progress, otherwise nothing will be displayed until the -** installation is complete. -*INTERACTIVE = NONE ** NONE, YES, MACHINE - -** The CONFIG_ONLY keyword is used to specify that the response file is being -** used for creating or configuring an instance, and nothing is to be -** installed. This keyword must be set to YES if a response file is used with -** db2isetup. -*CONFIG_ONLY = ** YES or NO - -** INSTALL_TYPE keyword is used to select the installation type. If you specify -** a TYPICAL or a COMPACT install type, no COMP keywords are required. In this -** case the installer will select the appropriate components for you. All COMP -** keywords are ignored by the installer unless the INSTALL_TYPE is set to -** CUSTOM. If you select the CUSTOM install type, then ensure that you enable -** all of the COMP keywords that are required for your database environment. -** -** Note: The install type is not related to the language selection. -** ---------------------------------------------------------------------------- -INSTALL_TYPE = CUSTOM ** TYPICAL, COMPACT, CUSTOM - -** The following components are part of all TYPICAL installations. If you -** perform a typical installation, all of these components will be installed on -** your computer. -** ---------------------------------------------------------------------------- - -** DB2 Advanced Copy Services help protect mission-critical data that requires -** 24x7 availability. It offers an integrated solution designed to implement -** high-efficiency backup and restore processes and helps eliminate -** backup-related performance issues. -*COMP = ACS ** Integrated Flash Copy Support - -** Provides federated support required to access DB2 for iSeries and DB2 for -** z/OS and OS/390 data sources. -*COMP = DB2_DATA_SOURCE_SUPPORT ** DB2 data source support - -** Sample database source provides sample data and metadata that allows you to -** create a sample database using the First Steps application. -COMP = DB2_SAMPLE_DATABASE ** Sample database source - -** Enables users and applications with Federated Data Source Access -*COMP = FED_DATA_SOURCE_SUPPORT ** Federated Data Access Support - -** First Steps is a graphical tool that will help familiarize you with DB2 -** features and functions. -*COMP = FIRST_STEPS ** First Steps - -** Guardium Installation Manager Client component will place the Guardium -** Installation Manager(GIM) Client under DB2 Install Path. -*COMP = GUARDIUM_INST_MNGR_CLIENT ** Guardium Installation Manager Client - -** The DB2 Instance Setup wizard is a Java-based tool you can use to set up -** instances on your computer after installing DB2. -COMP = INSTANCE_SETUP_SUPPORT ** DB2 Instance Setup wizard - -** LDAP Exploitation allows DB2 to use an LDAP directory to store database -** directory and configuration information. -*COMP = LDAP_EXPLOITATION ** DB2 LDAP support - -** Pacemaker is an open-source, high availability cluster manager software -** integrated on Linux. -*COMP = PCMK ** Pacemaker - -** IBM Tivoli System Automation for Multiplatforms provides high availability -** and disaster recovery capabilities for AIX, Linux, Solaris SPARC, and -** Windows. -** If this component is selected, it will either be installed, updated or -** upgraded by the DB2 installer. Use COMP=TSAMP only if you are running as -** root user. -*COMP = TSAMP ** Tivoli SA MP - - -** The following components are not part of TYPICAL installations, and thus can -** only be installed through CUSTOM installs. -** ---------------------------------------------------------------------------- - -** The base application development tools component contains tools and files -** (including header files, libraries, and a precompiler) that are needed for -** developing applications that work with DB2. -COMP = APPLICATION_DEVELOPMENT_TOOLS ** Base application development tools - -** A scalable, highly-available, high performance file system optimized for -** multi-petabyte storage management. -** If this component is selected, it will either be installed, updated or -** upgraded by the DB2 installer. Use COMP=GPFS only if you are running as -** root user. -*COMP = GPFS ** General Parallel File System (GPFS) - -** Application data sources use an application to access the underlying -** nonrelational data. The raw data can be in a number of standard and -** nonstandard formats. -*COMP = IINR_APPLICATIONS_WRAPPER ** Application data sources - -** Scientific data sources are developed exclusively for the life sciences -** industry, such as those containing genomic, proteomic, bioinformatic, and -** cheminformatic information. -*COMP = IINR_SCIENTIFIC_WRAPPER ** Scientific Data Sources - -** Structured file data sources contain nonrelational data stored in files with -** a defined, repeatable structure. -*COMP = IINR_STRUCTURED_FILES_WRAPPER ** Structured file data sources - -** Enables users and applications to submit distributed requests for data -** managed by Informix systems. -** This feature is only installed and not configured when the PURESCALE feature -** is selected for installation. -*COMP = INFORMIX_DATA_SOURCE_SUPPORT ** Informix data source support - -** Enables users and applications to submit distributed requests through JDBC -** for data managed by DBMS. -COMP = JDBC_DATA_SOURCE_SUPPORT ** JDBC data source support - -** Enables users and applications to submit distributed requests for data -** stored in any data source that supports ODBC and X/Open CLI compliant -** drivers. -COMP = ODBC_DATA_SOURCE_SUPPORT ** ODBC data source support - -** Enables users and applications to submit distributed requests for data -** managed by Oracle systems. -*COMP = ORACLE_DATA_SOURCE_SUPPORT ** Oracle data source support - -** The IBM DB2 pureScale Feature provides clustering technology to DB2 products -** on distributed platforms. -** Selecting the PURESCALE feature will automatically install every other -** required component. See the DB2 Information Center for more information on -** the pre-installation planning and prerequisites needed for a successful IBM -** DB2 pureScale installation and instance setup. Use COMP=PURESCALE only if -** you are running as root user. -*COMP = PURESCALE ** IBM DB2 pureScale Feature - -** Spatial Extender client contains the support required for communicating with -** a Spatial Extender server. -*COMP = SPATIAL_EXTENDER_CLIENT_SUPPORT ** Spatial Extender client - -** Provides Spatial Extender support for the DB2 server, providing the storing -** and query of geographical information in DB2 tables. -*COMP = SPATIAL_EXTENDER_SERVER_SUPPORT ** Spatial Extender server support - -** Enables users and applications to submit distributed requests for data -** managed by Microsoft SQL Server systems. -*COMP = SQL_SERVER_DATA_SOURCE_SUPPORT ** SQL Server data source support - -** Enables users and applications to submit distributed requests for data -** managed by Sybase systems. -*COMP = SYBASE_DATA_SOURCE_SUPPORT ** Sybase data source support - -** Enables users and applications to submit distributed requests for data -** managed by Teradata systems. -*COMP = TERADATA_DATA_SOURCE_SUPPORT ** Teradata data source support - -** The DB2 Text Search component, powered by OmniFind, delivers an integrated, -** high quality and scalable search technology in DB2 databases. -** This feature is only installed and not configured when the PURESCALE feature -** is selected for installation. -*COMP = TEXT_SEARCH ** DB2 Text Search - -** The following languages apply to all translated components. Enable the -** language(s) you want installed. If you do not enable any language keywords, -** then the English language (EN) will still be installed by default. -** --------------------------------------------------------------------------- -*LANG = BR ** Portuguese - Brazil (pt_BR) -*LANG = CN ** Simplified Chinese (zh_CN) -*LANG = CZ ** Czech (cs_CZ) -*LANG = DE ** German (de_DE) -*LANG = ES ** Spanish (es_ES) -*LANG = FR ** French (fr_FR) -*LANG = IT ** Italian (it_IT) -*LANG = JP ** Japanese (ja_JP) -*LANG = KR ** Korean (ko_KR) -*LANG = PL ** Polish (pl_PL) -*LANG = RU ** Russian (ru_RU) -*LANG = TW ** Traditional Chinese (zh_TW) - - -** (Valid for non-root upgrade only) Upgrade Older Release -** ------------------------------------------------------- -** Specify whether you want to upgrade any previous versions of the product. -** Specifying this keyword will remove any previous version and upgrade any -** settings to the new installation. Be aware that during upgrade of the -** current copy, only the product specified in the response file will be -** installed. Other previously installed products need to be upgraded -** separately following this upgrade. -*UPGRADE_PRIOR_VERSIONS = FALSE ** TRUE or FALSE - -** IBM DB2 pureScale Feature Host Information -** ------------------------------------------ -** Specify the hosts to which the DB2 product is to be installed. This section -** must always list the installation initiating host. Do no specify any -** keywords in this section if you are not installing the IBM DB2 pureScale -** Feature. Ensure that password-less ssh root access is available on all hosts -** and between all hosts. - -** The HOST keyword is used to specify a host identifier for one set of host -** keys. This keyword is mandatory if you are installing the IBM DB2 pureScale -** Feature. -*HOST = host1 ** char(14) no spaces - -** Use the HOSTNAME keyword with the host identifier prefix to identify the -** name of the host. A host can be a physical machine or LPAR, on which a DB2 -** member or a cluster caching facility will run. If an alias or IP address is -** provided, the installer will attempt to convert it to a canonical hostname -** prior to instance creation. The host name must be a unique host name across -** the network. The following formats are accepted: long name (for example, -** host1.ibm.com), short name (for example, host1), IP address (IPv4: -** xxx.xxx.xxx.xxx). This keyword is mandatory if you have specified the HOST -** keyword. -*host1.HOSTNAME = ** char(255) no spaces - -** The CLUSTER_INTERCONNECT_NETNAME keyword is used to specify the name of a -** high speed interconnect name that corresponds to a high speed adapter name. -** Refer to the DB2 Information Center for valid types of high speed adapters. -** This keyword is mandatory if you have specified the HOST keyword. -*host1.CLUSTER_INTERCONNECT_NETNAME = ** char(255) no spaces - - -*HOST = host2 ** char(14) no spaces -*host2.HOSTNAME = ** char(255) no spaces -*host2.CLUSTER_INTERCONNECT_NETNAME = ** char(255) no spaces - -** Instance Creation Settings -** -------------------------- -** User IDs managed by NIS/NIS+ are not supported. If an existing user ID is -** used, make sure it is not locked and its password has not expired. - -** Prefix name of one instance set. To create or update an instance, one set of -** instance keywords must be specified. The instance set is comprised of the -** identifying prefix value for the INSTANCE key followed by the keys that are -** prefixed by the specified INSTANCE prefix value. If you are creating a DSF -** instance you can only specify one instance at a time in this response file. -** Note: DSF is the instance type for a IBM DB2 pureScale instance. If you are -** not creating a DSF instance, then multiple instances can be specified for -** creation or update in this response file. -INSTANCE = DB2_INST ** char(8) no spaces - -** Real name of the instance, and also the user ID of instance owner. It can be -** different from the value of the INSTANCE keyword. If an existing ID is -** specified for the instance's NAME keyword, make sure the user ID exists on -** all the participating hosts with the same UID, GID, corresponding group -** name, user name and user home directory. Ensure that existing user IDs are -** not locked and that the password has not expired. IBM DB2 pureScale Feature -** users must specify a name that is unique across the IBM DB2 pureScale -** implementation. -DB2_INST.NAME = db2admin ** char(8) no spaces, no upper case letters - -** The UID will be generated if the keyword is not specified - highly -** recommended. -*DB2_INST.UID = ** Unsigned integer -DB2_INST.GROUP_NAME = db2grp ** char(30) no spaces - -** Use a generated GID if no value provided - highly recommended. -*DB2_INST.GID = ** Unsigned integer -*DB2_INST.HOME_DIRECTORY = ** char(64) no spaces. Valid for root installation only -*DB2_INST.PASSWORD = Passw@rd01 ** Valid for root installation only - -** If PURESCALE is selected or installed, the default instance type will be -** DSF. -DB2_INST.TYPE = ESE ** DSF ESE WSE STANDALONE CLIENT - -** Set the instance to be auto-started after system reboot. The AUTOSTART -** keyword can only be used by a root installation and only a non-pureScale -** instance type. This keyword is invalid for non-root installation. This -** keyword cannot be used for DSF instance type. -DB2_INST.AUTOSTART = YES ** YES or NO - -** The START_DURING_INSTALL keyword will start the instance during the -** installation. If this keyword is not specified, the behavior follows the -** AUTOSTART keyword above. -DB2_INST.START_DURING_INSTALL = YES ** YES or NO. Default is YES. -*DB2_INST.SVCENAME = db2c_db2inst1 ** BLANK or char(14). Reserved for root installation only -DB2_INST.PORT_NUMBER = 50000 ** 1024 - 65535, Reserved for root installation only - -** The ports in range [FCM_PORT_NUMBER, FCM_PORT_NUMBER+MAX_LOGICAL_NODES] are -** reserved during the installation. Valid for root installation only. If your -** instance type is DSF, the ports in range [FCM_PORT_NUMBER, -** FCM_PORTNUMBER+MAX_LOGICAL_NODES+3] is reserved. The ports have to be -** continuous and identical on all the participating hosts. -*DB2_INST.FCM_PORT_NUMBER = 20000 ** 1024 - 65535, the beginning port number. -*DB2_INST.MAX_LOGICAL_NODES = ** 1 - 128 for DSF instances or 1 - 199 for ESE instances. It is a maximum number of logical members to be used on one member host. Valid for root installation only. - -** The DB2CF_PORT_NUMBER and the DB2CF_MGMT_PORT_NUMBER are to be reserved for -** the cluster caching facility (CF). As the CF is an instance designation, the -** port names will be pre-defined based on the name of the instance. Example: -** Where the instance name is db2sdin1, the names required for the CF ports -** will be DB2CF_db2inst1 and DB2CF_db2inst1_MGMT. Ensure that all the port -** names are the same on all the participating hosts. The two CF ports must be -** available on all the participating hosts. If you want the installer to -** generate these values, leave them commented out. -*DB2_INST.DB2CF_PORT_NUMBER = 56001 ** 1024 - 65535. -*DB2_INST.DB2CF_MGMT_PORT_NUMBER = 56000 ** 1024 - 65535. - -** The PREFERRED_PRIMARY_CF is used to specify the preferred primary cluster -** caching facility needed to create a new IBM DB2 pureScale instance. This -** keyword is mandatory if you are creating a new IBM DB2 pureScale instance. -** The value provided must match the value of any HOST keyword specified in -** this response file. If you are extending an instance, this keyword should be -** commented out. -*DB2_INST.PREFERRED_PRIMARY_CF = ** a host identifier, char(14) - -** The PREFERRED_SECONDARY_CF is used to specify the preferred secondary -** cluster caching facility for the IBM DB2 pureScale instance. The value -** provided must match the value of any HOST keyword specified in this response -** file. This host identifier should be specified in any HOST section. -*DB2_INST.PREFERRED_SECONDARY_CF = ** a host identifier, char(14) - -** The MEMBER keyword is required if you are creating a new IBM DB2 pureScale -** instance. The value provided must match the value of any HOST keyword -** specified in this response file. Specify more MEMBER keywords so that each -** new host is defined in this response file as either a DB2 member or a -** cluster caching facility (CF host, see above). -*DB2_INST.MEMBER = ** a host identifier, char(14) -*DB2_INST.CLIENT_IMPORT_PROFILE = ** a full path or a file in the same directory as the response file - -** Do not set FEDERATED if you are creating or configuring a DSF instance. -*DB2_INST.FEDERATED = ** YES or NO - -** Do not set INFORMIX_CLIENT_HOME if you are creating or configuring a DSF -** instance. -*DB2_INST.INFORMIX_CLIENT_HOME = BLANK ** BLANK, char(1023) - -** Do not set INFORMIX_SERVER_HOME if you are creating or configuring a DSF -** instance. -*DB2_INST.INFORMIX_SERVER_HOME = BLANK ** BLANK, char(1023) -*DB2_INST.ORACLE_HOME = ** any valid path , char(64) no spaces -*DB2_INST.SYBASE_HOME = ** any valid path, char(1023) -*DB2_INST.SYBASE_OCS = ** valid SYBASE_OCS directory name, char(1023) -*DB2_INST.SQLSERVER_ODBC_LIB_PATH = ** the full path name where libodbc file is in, char(1023) -*DB2_INST.SQLSERVER_ODBC_INI_PATH = ** the full path name of .odbc.ini file including the file name, char(1023) -*DB2_INST.TERADATA_CLI_PATH = ** the full path name to libcliv2.so library -*DB2_INST.TERADATA_ERRMSG_PATH = ** the full path name to errmsg.txt error message file -*DB2_INST.AUTHENTICATION = SERVER ** CLIENT, SERVER, or SERVER_ENCRYPT - -** An existing user ID should be specified for DB2SSHID_USERNAME keyword, make -** sure the user ID exists on all the participating hosts with the same UID, -** GID, corresponding group name, user name and user home directory. Ensure -** that existing user IDs are not locked and that the password has not expired. -** IBM DB2 pureScale Feature users must specify a name that is unique across -** the IBM DB2 pureScale implementation. -*DB2_INST.DB2SSHID_USERNAME = ** char(8) no spaces, no upper case letters - -** Tivoli SA MP Tiebreaker Settings (IBM DB2 pureScale Feature only) -** ----------------------------------------------------------------- -** The DB2_CLUSTER_SERVICES_TIEBREAKER_DEVICE_PATH keyword is used to specify -** the device path for Tivoli SA MP Tiebreaker setup. The keyword is mandatory -** when setting up the first IBM DB2 pureScale instance. - -** All the hosts specified in HOST section must have direct access to this -** disk. -*DB2_CLUSTER_SERVICES_TIEBREAKER_DEVICE_PATH = ** a valid device path, for example, /dev/sda - -** Shared File System Settings (IBM DB2 pureScale Feature only) -** ------------------------------------------------------------ -** Only one of the following two keywords is needed when setting up the first -** IBM DB2 pureScale instance on the host; If both INSTANCE_SHARED_DEVICE_PATH -** and INSTANCE_SHARED_DIR are specified, INSTANCE_SHARED_DIR will be ignored. -** If the task is to extend an instance to a new host, both of these keywords -** will be ignored. - -** Specify INSTANCE_SHARED_DEVICE_PATH to create a DB2 cluster file system. All -** the hosts specified in the HOST sections should have direct access to the -** shared device path specified. -*INSTANCE_SHARED_DEVICE_PATH = ** a valid device path, for example, /dev/sda - -** Specify the INSTANCE_SHARED_MOUNT to define the mounting point of the new -** DB2 cluster file system. It is optional and valid only if -** INSTANCE_SHARED_DEVICE_PATH is specified. -*INSTANCE_SHARED_MOUNT = ** a valid mount point of the new DB2 cluster file system. - -** Specify the INSTANCE_SHARED_DIR to use a user-managed shared file system for -** instance creation. -*INSTANCE_SHARED_DIR = ** a valid mount point of shared file system. - -** Fenced User Creation Settings -** ----------------------------- -** Valid for root installation only. User IDs managed by NIS/NIS+ are not -** supported. If an existing ID is used, make sure it is not locked and its -** password has not expired. - -** Make sure the user name specified for FENCED_USERNAME is not locked and its -** password has not expired. -DB2_INST.FENCED_USERNAME = db2fncd ** char(8) no spaces, no upper case letters - -** If no value is provided for FENCED_UID keyword, the DB2 installer will -** generate one for you. This is highly recommended. -*DB2_INST.FENCED_UID = ** Unsigned integer -DB2_INST.FENCED_GROUP_NAME = db2fgrp ** char(30) no spaces - -** If no value is provided for FENCED_GID keyword, the DB2 installer will -** generate one for you. This is highly recommended. -*DB2_INST.FENCED_GID = ** Unsigned integer -*DB2_INST.FENCED_HOME_DIRECTORY = ** char(64) no spaces - -** This FENCED_PASSWORD is required if the fenced user ID is a new user -*DB2_INST.FENCED_PASSWORD = ** char(8) - -** Text Search Configuration -** ------------------------- - -** Do not set CONFIGURE_TEXT_SEARCH if you are creating or configuring a DSF -** instance. -*DB2_INST.CONFIGURE_TEXT_SEARCH = NO ** YES or NO - -** Do not set TEXT_SEARCH_HTTP_SERVICE_NAME if you are creating or configuring -** a DSF instance. -*DB2_INST.TEXT_SEARCH_HTTP_SERVICE_NAME = db2j_db2inst1 ** BLANK or char(14). Valid for root installation only - -** Do not set TEXT_SEARCH_HTTP_PORT_NUMBER if you are creating or configuring a -** DSF instance. -*DB2_INST.TEXT_SEARCH_HTTP_PORT_NUMBER = 55000 ** Any unused port number from 1024 - 65535 - -** Instance DBM CFG Settings -** ------------------------- -*DB2_INST.CF_DIAGLEVEL = 2 ** a number in range [0 - 4] -*DB2_INST.CF_DIAGPATH = ** BLANK or char(215) -*DB2_INST.CF_MEM_SZ = AUTOMATIC ** AUTOMATIC or a number in range [32768 - 4 294 967 295] -*DB2_INST.CF_NUM_CONNS = AUTOMATIC ** AUTOMATIC or a number in range [4-256] -*DB2_INST.CF_NUM_WORKERS = AUTOMATIC ** AUTOMATIC or a number in range [1 - 31] -*DB2_INST.RSTRT_LIGHT_MEM = AUTOMATIC ** 1-10 for AUTOMATIC or a number in range [1 - 50] -*DB2_INST.AGENTPRI = ** SYSTEM, -1 or 41-128 -*DB2_INST.ASLHEAPSZ = ** 1 - 524288 -*DB2_INST.AUDIT_BUF_SZ = ** 0 - 65000 -*DB2_INST.CATALOG_NOAUTH = ** 0, 1, YES or NO -*DB2_INST.CLUSTER_MGR = ** TSA, VENDOR: -*DB2_INST.COMM_BANDWIDTH = ** -1 or 0.1 - 100000.0 -*DB2_INST.CONN_ELAPSE = ** 0 - 100 -*DB2_INST.CPUSPEED = ** -1 or 1e-10 - 1 -DB2_INST.DFTDBPATH = /data ** any valid path -*DB2_INST.DFT_ACCOUNT_STR = ** BLANK or char(25) -*DB2_INST.DFT_MON_BUFPOOL = ** ON or OFF -*DB2_INST.DFT_MON_LOCK = ** ON or OFF -*DB2_INST.DFT_MON_SORT = ** ON or OFF -*DB2_INST.DFT_MON_STMT = ** ON or OFF -*DB2_INST.DFT_MON_TABLE = ** ON or OFF -*DB2_INST.DFT_MON_UOW = ** ON or OFF -*DB2_INST.DFT_MON_TIMESTAMP = ** ON or OFF -*DB2_INST.DIAGLEVEL = ** 0 - 4 -*DB2_INST.DIAGPATH = ** BLANK or char(215) -*DB2_INST.DIAGSIZE = ** A value specified in MB and limited by the available disk space in DIAGPATH. Minimum 2 MB must be specified. -*DB2_INST.FENCED_POOL = -1 or AUTOMATIC ** -1(MAX_COORDAGENTS), AUTOMATIC or a number in range [0, 64000] -*DB2_INST.INSTANCE_MEMORY = AUTOMATIC ** AUTOMATIC or a number in range [0, 1000000] for 32-bit and [0, 68719476736] for 64-bit -*DB2_INST.HEALTH_MON = ** default is ON; ON or OFF -*DB2_INST.MAX_CONNECTIONS = -1 or AUTOMATIC ** -1, AUTOMATIC or [1, 64000] -*DB2_INST.FED_NOAUTH = NO ** YES or NO, default is NO -*DB2_INST.DIR_CACHE = ** YES or NO -*DB2_INST.DISCOVER = ** DISABLE, KNOWN or SEARCH -*DB2_INST.DISCOVER_COMM = ** BLANK or TCPIP -*DB2_INST.DISCOVER_INST = ** ENABLE or DISABLE -*DB2_INST.FCM_NUM_ANCHORS = ** -1 or 128 - FCM_NUM_RQB -*DB2_INST.FCM_NUM_BUFFERS = ** 128 - 65300 -*DB2_INST.FCM_NUM_CONNECT = ** -1 or 128 - FCM_NUM_RQB -*DB2_INST.FCM_NUM_RQB = ** 128 - 120000 -*DB2_INST.INDEXREC = ** ACCESS or RESTART -*DB2_INST.INTRA_PARALLEL = NO ** SYSTEM, YES or NO -*DB2_INST.JAVA_HEAP_SZ = ** 0 - 4096 -*DB2_INST.JDK_PATH = ** BLANK or char(255) -*DB2_INST.SSL_SVR_KEYDB = ** BLANK or char(1023) -*DB2_INST.SSL_SVR_STASH = ** BLANK or char(1023) -*DB2_INST.SSL_SVR_LABEL = ** BLANK or char(1023) -*DB2_INST.SSL_SVCENAME = ** BLANK or char(14) -*DB2_INST.SSL_CIPHERSPECS = ** BLANK or char(255) -*DB2_INST.SSL_VERSIONS = ** BLANK or char(255) -*DB2_INST.SSL_CLNT_KEYDB = ** BLANK or char(1023) -*DB2_INST.SSL_CLNT_STASH = ** BLANK or char(1023) -*DB2_INST.ALTERNATE_AUTH_ENC = ** NOT_SPECIFIED, AES_ONLY, AES_CMP -*DB2_INST.KEEPDARI = ** YES or NO -*DB2_INST.MAXAGENTS = ** 1 - 64000 -*DB2_INST.MAXCAGENTS = ** -1 or 1 - MAX_COORDAGENTS -*DB2_INST.MAXDARI = ** -1 or 1 - MAX_COORDAGENTS -*DB2_INST.MAXTOTFILOP = ** 100 - 32768 -*DB2_INST.MAX_CONNRETRIES = ** 0 - 100 -*DB2_INST.MAX_COORDAGENTS = 200 or AUTOMATIC ** 200, AUTOMATIC, -1 or 0 - 64000, -1 translates into a value of 200 -*DB2_INST.MAX_TIME_DIFF = 300 ** 1-1440. The unit of measurement is second -*DB2_INST.MAX_QUERYDEGREE = ** ANY, -1 or 1 - 32767 -*DB2_INST.MON_HEAP_SZ = AUTOMATIC ** AUTOMATIC or 0 - 60000 -DB2_INST.NUMDB = 64 ** 1 - 256 -*DB2_INST.NUM_INITAGENTS = 0 ** 0 - 64000 -*DB2_INST.NUM_INITDARIS = ** 0 - MAXDARI -*DB2_INST.NUM_INITFENCED = 0 ** 0 - 64000 -*DB2_INST.NUM_POOLAGENTS = 100 or AUTOMATIC ** -1, AUTOMATIC or 0 - 64000 -*DB2_INST.QUERY_HEAP_SZ = ** 2 - 524288 -*DB2_INST.RESTBUFSZ = ** 16 - 524288 -*DB2_INST.RESYNC_INTERVAL = ** 1 - 60000 -*DB2_INST.ROUTE_OBJ_NAME = ** BLANK or char(255) -*DB2_INST.RQRIOBLK = ** 4096 - 65535 -*DB2_INST.SHEAPTHRES = ** 250 - 2097152 -*DB2_INST.SPM_LOG_FILE_SZ = ** 4 - 1000 -*DB2_INST.SPM_LOG_PATH = ** BLANK or char(226) -*DB2_INST.SPM_MAX_RESYNC = ** 10 - 256 -*DB2_INST.SPM_NAME = ** BLANK or char(8) -*DB2_INST.START_STOP_TIME = ** 1 - 1440 -*DB2_INST.SYSADM_GROUP = ** BLANK or char(30) -*DB2_INST.SYSCTRL_GROUP = ** BLANK or char(30) -*DB2_INST.SYSMAINT_GROUP = ** BLANK or char(30) -*DB2_INST.TP_MON_NAME = ** BLANK or char(19) -*DB2_INST.TRUST_ALLCLNTS = ** YES, NO or DRDAONLY -*DB2_INST.TRUST_CLNTAUTH = ** CLIENT or SERVER -*DB2_INST.UDF_MEM_SZ = ** 128 - 60000 -*DB2_INST.FCM_NUM_CHANNELS = ** 128, 524288 -*DB2_INST.FEDERATED_ASYNC = 0 ** ANY or 0 - 32767 - -** Instance Profile Registry Settings -** ---------------------------------- -*DB2_INST.DB2ACCOUNT = ** BLANK or char(199) -*DB2_INST.DB2ATLD_PORTS = ** BLANK or 1-65535:1-65535 n1<=n2 -*DB2_INST.DB2BIDI = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2BQTIME = ** BLANK or 1 - MAX -*DB2_INST.DB2BQTRY = ** BLANK or 0 - MAX -*DB2_INST.DB2CHKPTR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2CLIINIPATH = ** BLANK or char(260) -*DB2_INST.DB2CODEPAGE = ** BLANK or 0 - MAX -*DB2_INST.DB2CONNECT_IN_APP_PROCESS = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2COUNTRY = ** BLANK or 1 - 999 -*DB2_INST.DB2DBDFT = ** BLANK or char(8) -*DB2_INST.DB2DEFPREP = ** BLANK, ALL, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2ENVLIST = ** BLANK or char() -*DB2_INST.DB2INCLUDE = ** BLANK or char() -*DB2_INST.DB2IQTIME = ** BLANK or 1 - MAX -*DB2_INST.DB2LIBPATH = ** BLANK or char() -*DB2_INST.DB2LOADREC = ** BLANK or char(260) -*DB2_INST.DB2LOCK_TO_RB = ** BLANK or STATEMENT -*DB2_INST.DB2NOEXITLIST = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2OLDEVMON = ** BLANK or char() -*DB2_INST.DB2OPTIONS = ** BLANK or -/+[a,c,e[c,s],n,o,p,s,t,v,w,x] and/or -[f,l,r,z]filename -*DB2_INST.DB2_OPTSTATS_LOG = ** OFF or ON with parameters {NUM | SIZE | NAME | DIR} -*DB2_INST.DB2PRIORITIES = ** BLANK or char() -*DB2_INST.DB2RQTIME = ** BLANK or 1 - MAX -*DB2_INST.DB2_SET_MAX_CONTAINER_SIZE = ** -1 (no limit) or any integer greater than 64MB -*DB2_INST.DB2SORT = ** BLANK or char(260) -*DB2_INST.DB2_SYSTEM_MONITOR_SETTINGS = ** Controls parameters OLD_CPU_USAGE and DISABLE_CPU_USAGE with ON or OFF values -*DB2_INST.DB2_AVOID_PREFETCH = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2_CORRELATED_PREDICATES = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2_FORCE_NLS_CACHE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2_HASH_JOIN = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2_INDEX_FREE = ** BLANK or 0 - 60 -*DB2_INST.DB2_LIKE_VARCHAR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T, F or 0.0 - 5.0 (exclusive) -*DB2_INST.DB2_LOADSORT_STACKSZ = ** BLANK or 1 - MAX -*DB2_INST.DB2_NO_PKG_LOCK = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2_NUM_FAILOVER_NODES = ** BLANK or 0 - 999 -*DB2_INST.DB2_PARALLEL_IO = ** BLANK, * or 0-4095,0-4095,... -*DB2_INST.DB2_PRED_FACTORIZE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2_SORT_AFTER_TQ = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2_STRIPED_CONTAINERS = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_INST.DB2INSTOWNER = ** BLANK or char(30) -*DB2_INST.DB2DBMSADDR = ** BLANK or char(10) -*DB2_INST.DB2_DISABLE_FLUSH_LOG = ** BLANK or ON, OFF -*DB2_INST.DB2LOCALE = ** BLANK or YES, NO -*DB2_INST.DB2NODE = ** BLANK or YES NO -*DB2_INST.DB2_USE_PAGE_CONTAINER_TAG = ** BLANK or ON -*DB2_INST.DB2TCPCONNMGRS = ** BLANK or 1 - 8 -*DB2_INST.DB2_PARTITIONEDLOAD_DEFAULT = ** BLANK or YES, NO -*DB2_INST.DB2_INLIST_TO_NLJN = ** BLANK or YES, NO -*DB2_INST.DB2_SELECTIVITY = ** BLANK or YES, NO -*DB2_INST.DB2_REDUCED_OPTIMIZATION = ** BLANK, DISABLE, YES, NO, 0 - MAX -*DB2_INST.DB2_BINSORT = ** BLANK or YES, NO -*DB2_INST.DB2BPVARS = ** BLANK or char() -*DB2_INST.DB2_ENABLE_BUFPD = ** BLANK or ON, OFF -*DB2_INST.DB2_EVMON_EVENT_LIST_SIZE = 0 ** A value specified in KB, MB or GB and limited by the available memory from the monitor heap -*DB2_INST.DB2_EXTENDED_OPTIMIZATION = ** BLANK or ON, OFF -*DB2_INST.DB2FODC = Concatenation of all FODC parameters: CORELIMIT, DUMPCORE, DUMDIR, MEMSCAN and SERVICELEVEL ** CORELIMIT, DUMPCORE, DUMPDIR and MEMSCAN parameters are set different for Unix and Windows -*DB2_INST.DB2MAXFSCRSEARCH = ** BLANK or -1, 1 - 33554 -*DB2_INST.DB2MEMDISCLAIM = ** BLANK or YES, NO -*DB2_INST.DB2_VENDOR_INI = ** BLANK or char() -*DB2_INST.DB2_XBSA_LIBRARY = ** BLANK or char() -*DB2_INST.DB2LDAP_SEARCH_SCOPE = ** BLANK LOCAL DOMAIN GLOBAL -*DB2_INST.DB2MEMMAXFREE = ** BLANK or char() -*DB2_INST.DB2NTMEMSIZE = ** BLANK or char() -*DB2_INST.DB2_OVERRIDE_BPF = ** BLANK or 1 - MAX -*DB2_INST.DB2_DJ_COMM = ** BLANK or char() -*DB2_INST.DB2ADMINSERVER = ** BLANK or char(64) -*DB2_INST.DB2_PINNED_BP = NO ** YES or NO -*DB2_INST.DB2REMOTEPREG = ** BLANK or char(64) -*DB2_INST.DB2_ANTIJOIN = ** BLANK or YES, NO, EXTEND -*DB2_INST.DB2_COLLECT_TS_REC_INFO = ** BLANK or YES, NO -*DB2_INST.DB2PROCESSORS = ** BLANK or 1 - MAX -*DB2_INST.DB2ASSUMEUPDATE = ** BLANK or ON, OFF -*DB2_INST.DB2_SKIPDELETED = ** BLANK or ON, OFF -*DB2_INST.DB2_SQLROUTINE_PREPOPTS = ** BLANK or char() -*DB2_INST.DB2_INDEX_TYPE2 = ** BLANK or ON, OFF -*DB2_INST.DB2_APM_PERFORMANCE = ** BLANK or ON, OFF -*DB2_INST.DB2_FMP_COMM_HEAPSZ = ** BLANK or 1 - MAX -*DB2_INST.DB2_EVALUNCOMMITTED = ** BLANK or YES, NO -*DB2_INST.DB2_NO_FORK_CHECK = ** BLANK or ON, OFF -*DB2_INST.DB2_KEEPTABLELOCK = ** BLANK or ON, OFF -*DB2_INST.DB2GRAPHICUNICODESERVER = ** BLANK or ON, OFF -*DB2_INST.DB2_MINIMIZE_LISTPREFETCH = ** BLANK or YES, NO -*DB2_INST.DB2_TRUSTED_BINDIN = ** BLANK or ON, OFF, CHECK -*DB2_INST.DB2_CLPPROMPT = ** BLANK or char(99) -*DB2_INST.DB2_FORCE_APP_ON_MAX_LOG = ** BLANK or TRUE, FALSE -*DB2_INST.DB2_CLP_EDITOR = ** BLANK or char() -*DB2_INST.DB2_CLP_HISTSIZE = ** BLANK or 1 - 500 -*DB2_INST.DB2_LOAD_COPY_NO_OVERRIDE = ** BLANK or LOCAL, DOMAIN, GLOBAL -*DB2_INST.DB2_MAX_NON_TABLE_LOCKS = ** BLANK or 1 - MAX -*DB2_INST.DB2_USE_ALTERNATE_PAGE_CLEANING = ** BLANK or ON, OFF -*DB2_INST.DB2_SCATTERED_IO = ** BLANK or ON, OFF -*DB2_INST.DB2_NO_MPFA_FOR_NEW_DB = ** BLANK or YES, NO -*DB2_INST.DB2_OBJECT_TABLE_ENTRIES = ** BLANK or 0 - 50000 -*DB2_INST.DB2_VIEW_REOPT_VALUES = ** BLANK or YES, NO -*DB2_INST.DB2_SELUDI_COMM_BUFFER = ** BLANK or ON, OFF -*DB2_INST.DB2_ENABLE_AUTOCONFIG_DEFAULT = ** BLANK, YES, NO -*DB2_INST.DB2_OPT_MAX_TEMP_SIZE = ** BLANK or 0 - MAX -*DB2_INST.DB2RCMD_LEGACY_MODE = ** YES, ON, TRUE, 1 or NO, OFF, FALSE, 0 -*DB2_INST.DB2_LARGE_PAGE_MEM = ** *, DB -*DB2_INST.DB2_MAX_LOB_BLOCK_SIZE = 0 ** 0 - 21487483647 -*DB2_INST.DB2RSHCMD = rsh ** Values are a full path name to rsh, or ssh -*DB2_INST.DB2AUTH = ** BLANK or char() -*DB2_INST.DB2CONNECT_DISCONNECT_ON_INTERRUPT = NO ** YES, TRUE, 1 or NO, FALSE, 0 -*DB2_INST.DB2CONNECT_ENABLE_EURO_CODEPAGE = ** BLANK or char() -*DB2_INST.DB2FCMCOMM = TCPIP4 ** TCPIP4 or TCPIP6 -*DB2_INST.DB2FFDC = ** BLANK, ON, CORE:OFF -*DB2_INST.DB2LOADFLAGS = ** BLANK or char() -*DB2_INST.DB2RSHTIMEOUT = 30 ** 1 - 120 -*DB2_INST.DB2TCP_CLIENT_CONTIMEOUT = 0 ** 0 - 32767 -*DB2_INST.DB2TCP_CLIENT_RCVTIMEOUT = 0 ** 0 - 32767 -*DB2_INST.DB2TRC_DEF_BUFFSIZE = ** BLANK or char() -*DB2_INST.DB2YIELD = ** BLANK or char() -*DB2_INST.DB2_ASYNC_IO_MAXFILOP = MAXFILOP ** MAXFILOP - MAX -*DB2_INST.DB2_BAR_AUTONOMIC_DISABLE = ** BLANK or char() -*DB2_INST.DB2_CONNRETRIES_INTERVAL = ** BLANK or char() -*DB2_INST.DB2_DXX_PATHS_ALLOWED_READ = ** BLANK or char() -*DB2_INST.DB2_DXX_PATHS_ALLOWED_WRITE = ** BLANK or char() -*DB2_INST.DB2_HADR_BUF_SIZE = 2*LOGBUFSZ ** BLANK or 0 - MAX -*DB2_INST.DB2_LOGGING_DETAIL = ** BLANK or char() -*DB2_INST.DB2_MAP_XML_AS_CLOB_FOR_DLC = NO ** YES, NO -*DB2_INST.DB2_MAX_CLIENT_CONNRETRIES = ** BLANK or char() -*DB2_INST.DB2_MAX_INACT_STMTS = ** 0 - 4294967296 -*DB2_INST.DB2_MDC_ROLLOUT = IMMEDIATE ** DEFER, IMMEDIATE or OFF -*DB2_INST.DB2_MINIMUM_CLIENT_LEVEL = ** BLANK or char() -*DB2_INST.DB2_NUM_CKPW_DAEMONS = 3 ** 0 - 100 -*DB2_INST.DB2_RESOURCE_POLICY = ** valid path to configuration file -*DB2_INST.DB2_SKIPINSERTED = OFF ** ON, OFF -*DB2_INST.DB2_SMS_TRUNC_TMPTABLE_THRESH = ** -1, 0-n where n is the number of extents per container that are to be maintained -*DB2_INST.DB2_SNAPSHOT_NOAUTH = ** BLANK or char() -*DB2_INST.DB2_TAPEMGR_TAPE_EXPIRATION = ** BLANK or char() -*DB2_INST.DB2_UPDDBCFG_SINGLE_DBPARTITION = ** YES, 1, TRUE or NO, 0, FALSE -*DB2_INST.DB2_USE_DB2JCCT2_JROUTINE = ** ON, YES, 1, TRUE or OFF, NO, 0, FALSE -*DB2_INST.DB2_UTIL_MSGPATH = instanceName/tmp directory ** BLANK or char() -*DB2_INST.DB2_WORKLOAD = Not set ** BLANK, SAP - -** 2nd (non-pureScale) Instance Creation Settings -** ---------------------------------------------- -** Multiple (non-pureScale) DB2 instances can be created in the same -** installation. This section shows how to specify the 2nd instance in the rsp -** file. Note: Only a subset of the instance keywords are listed below. You can -** specify other instance related keywords similar as the 1st instance. All -** keywords in this section are commented out. By default, only one instance -** will be created during the install. - -** Prefix name of this instance set. Its value is used by all keywords for the -** same instance. -*INSTANCE = DB2_INS2 ** char(8) no spaces -*DB2_INS2.NAME = db2inst2 ** char(8) no spaces, no upper case letters - -** Use a generated UID if no value provided - highly recommended. -*DB2_INS2.UID = ** Unsigned integer -*DB2_INS2.GROUP_NAME = db2iadm1 ** char(30) no spaces - -** Use a generated GID if no value provided - highly recommended. -*DB2_INS2.GID = ** Unsigned integer -*DB2_INS2.HOME_DIRECTORY = ** char(64) no spaces. Valid for root install only -*DB2_INS2.PASSWORD = Replace with your password ** Valid for root install only - -** Administration Server Creation Settings -** --------------------------------------- -** Valid for root installation only. User IDs managed by NIS/NIS+ are not -** supported. If an existing ID is used, make sure it is not locked and its -** password has not expired. -*DAS_USERNAME = ** char(8) no spaces, no upper case letters -*DAS_UID = ** use db2 generated UID if no values provided(highly recommended) OR a valid unsign int -*DAS_GROUP_NAME = ** char(30) no spaces -*DAS_GID = ** use db2 generated GID if no values provided(highly recommended) OR a valid unsign int -*DAS_HOME_DIRECTORY = ** char(64) no spaces -*DAS_PASSWORD = ** char(8) -*DAS_SMTP_SERVER = ** char(64) no spaces - -** Global Profile Registry Settings -** -------------------------------- -*DB2ACCOUNT = ** BLANK or char(199) -*DB2ATLD_PORTS = ** BLANK or 1-65535:1-65535 n1<=n2 -*DB2BIDI = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2BQTIME = ** BLANK or 1 - MAX -*DB2BQTRY = ** BLANK or 0 - MAX -*DB2CHGPWD_EEE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2CHKPTR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2CLIINIPATH = ** BLANK or char(260) -*DB2CODEPAGE = ** BLANK or 0 - MAX -*DB2COMM = ** BLANK or TCPIP -*DB2COUNTRY = ** BLANK or 1 - 999 -*DB2DBDFT = ** BLANK or char(8) -*DB2DEFPREP = ** BLANK, ALL, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2ENVLIST = ** BLANK or char() -*DB2IQTIME = ** BLANK or 1 - MAX -*DB2LDAPCACHE = ** YES or NO -*DB2LDAPHOST = ** BLANK or char() -*DB2LDAP_BASEDN = ** BLANK or char() -*DB2LDAP_CLIENT_PROVIDER = ** BLANK, MICROSOFT or IBM -*DB2LIBPATH = ** BLANK or char() -*DB2LOADREC = ** BLANK or char(1023) -*DB2LOCK_TO_RB = ** BLANK or STATEMENT -*DB2NOEXITLIST = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2OLDEVMON = ** BLANK or char() -*DB2OPTIONS = ** BLANK or -/+[a,c,e[c,s],n,o,p,s,t,v,w,x] and/or -[f,l,r,z]filename -*DB2_OPTSTATS_LOG = ** OFF or ON with parameters {NUM | SIZE | NAME | DIR} -*DB2PRIORITIES = ** BLANK or char() -*DB2RQTIME = ** BLANK or 1 - MAX -*DB2_SET_MAX_CONTAINER_SIZE = ** -1 (no limit) or any integer greater than 64MB -*DB2SORT = ** BLANK or char(1023) -*DB2SYSTEM = ** char(64) -*DB2_SYSTEM_MONITOR_SETTINGS = ** Controls parameters OLD_CPU_USAGE and DISABLE_CPU_USAGE with ON or OFF values -*DB2_ENABLE_LDAP = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_FORCE_NLS_CACHE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2_NUM_FAILOVER_NODES = ** BLANK or 0 - 999 -*DB2_SORT_AFTER_TQ = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F -*DB2INSTOWNER = ** BLANK or char(30) -*DB2DBMSADDR = ** BLANK or char(10) -*DB2_DISABLE_FLUSH_LOG = ** BLANK or ON, OFF -*DB2_LIC_STAT_SIZE = ** BLANK or 0 - 32767 -*DB2LOCALE = ** BLANK or YES, NO -*DB2NODE = ** BLANK or YES NO -*DB2_USE_PAGE_CONTAINER_TAG = ** BLANK or ON -*DB2TCPCONNMGRS = ** BLANK or 1 - 8 -*DB2_PARTITIONEDLOAD_DEFAULT = ** BLANK or YES, NO -*DB2_INLIST_TO_NLJN = ** BLANK or YES, NO -*DB2_SELECTIVITY = ** BLANK or YES, NO -*DB2_REDUCED_OPTIMIZATION = ** BLANK, DISABLE, YES, NO, 0 - MAX -*DB2_BINSORT = ** BLANK or YES, NO -*DB2BPVARS = ** BLANK or char() -*DB2_ENABLE_BUFPD = ** BLANK or ON, OFF -*DB2_EVMON_EVENT_LIST_SIZE = 0 ** A value specified in KB, MB or GB but limited by the available memory from the monitor heap -*DB2_EXTENDED_OPTIMIZATION = ** BLANK or ON, OFF -*DB2FODC = Concatenation of all FODC parameters: CORELIMIT, DUMPCORE, DUMDIR and MEMSCAN; and their values ** CORELIMIT, DUMPCORE, DUMPDIR and MEMSCAN parameters are set different for Unix and Windows -*DB2MAXFSCRSEARCH = ** BLANK or -1, 1 - 33554 -*DB2MEMDISCLAIM = ** BLANK or YES, NO -*DB2_VENDOR_INI = ** BLANK or char() -*DB2_XBSA_LIBRARY = ** BLANK or char() -*DB2LDAP_SEARCH_SCOPE = ** BLANK LOCAL DOMAIN GLOBAL -*DB2MEMMAXFREE = ** BLANK or char() -*DB2NTMEMSIZE = ** BLANK or char() -*DB2_OVERRIDE_BPF = ** BLANK or 1 - MAX -*DB2_DJ_COMM = ** BLANK or char() -*DB2ADMINSERVER = ** BLANK or char(64) -*DB2_PINNED_BP = NO ** YES or NO -*DB2REMOTEPREG = ** BLANK or char(64) -*DB2_ANTIJOIN = ** BLANK or YES, NO, EXTEND -*DB2_COLLECT_TS_REC_INFO = ** BLANK or YES, NO -*DB2PROCESSORS = ** BLANK or 1 - MAX -*DB2ASSUMEUPDATE = ** BLANK or ON, OFF -*DB2_SKIPDELETED = ** BLANK or ON, OFF -*DB2_SQLROUTINE_PREPOPTS = ** BLANK or char() -*DB2_INDEX_TYPE2 = ** BLANK or ON, OFF -*DB2_APM_PERFORMANCE = ** BLANK or ON, OFF -*DB2_FMP_COMM_HEAPSZ = ** BLANK or 1 - MAX -*DB2_EVALUNCOMMITTED = ** BLANK or YES, NO -*DB2_NO_FORK_CHECK = ** BLANK or ON, OFF -*DB2_KEEPTABLELOCK = ** BLANK or ON, OFF -*DB2GRAPHICUNICODESERVER = ** BLANK or ON, OFF -*DB2_MINIMIZE_LISTPREFETCH = ** BLANK or YES, NO -*DB2_TRUSTED_BINDIN = ** BLANK or ON, OFF, CHECK -*DB2_CLPPROMPT = ** BLANK or char(99) -*DB2_FORCE_APP_ON_MAX_LOG = ** BLANK or TRUE, FALSE -*DB2_CLP_EDITOR = ** BLANK or char() -*DB2_CLP_HISTSIZE = ** BLANK or 1 - 500 -*DB2_LOAD_COPY_NO_OVERRIDE = ** BLANK or LOCAL, DOMAIN, GLOBAL -*DB2_MAX_NON_TABLE_LOCKS = ** BLANK or 1 - MAX -*DB2_USE_ALTERNATE_PAGE_CLEANING = ** BLANK or ON, OFF -*DB2_SCATTERED_IO = ** BLANK or ON, OFF -*DB2_NO_MPFA_FOR_NEW_DB = ** BLANK or YES, NO -*DB2_OBJECT_TABLE_ENTRIES = ** BLANK or 0 - 50000 -*DB2_VIEW_REOPT_VALUES = ** BLANK or YES, NO -*DB2_SELUDI_COMM_BUFFER = ** BLANK or ON, OFF -*DB2_ENABLE_AUTOCONFIG_DEFAULT = ** BLANK, YES, NO -*DB2_OPT_MAX_TEMP_SIZE = ** BLANK or 0 - MAX -*DB2RCMD_LEGACY_MODE = ** YES, ON, TRUE, 1 or NO, OFF, FALSE, 0 -*DB2_LARGE_PAGE_MEM = ** *, DB -*DB2_MAX_LOB_BLOCK_SIZE = 0 ** 0 - 21487483647 -*DB2RSHCMD = rsh ** Values are a full path name to rsh, or ssh -*DB2AUTH = ** BLANK or char() -*DB2CONNECT_DISCONNECT_ON_INTERRUPT = NO ** YES, TRUE, 1 or NO, FALSE, 0 -*DB2CONNECT_ENABLE_EURO_CODEPAGE = ** BLANK or char() -*DB2FCMCOMM = TCPIP4 ** TCPIP4 or TCPIP6 -*DB2FFDC = ** BLANK, ON, CORE:OFF -*DB2LOADFLAGS = ** BLANK or char() -*DB2RSHTIMEOUT = 30 ** or 1 - 120 -*DB2TCP_CLIENT_CONTIMEOUT = 0 ** 0 - 32767 -*DB2TCP_CLIENT_RCVTIMEOUT = 0 ** 0 - 32767 -*DB2TRC_DEF_BUFFSIZE = ** BLANK or char() -*DB2YIELD = ** BLANK or char() -*DB2_ASYNC_IO_MAXFILOP = MAXFILOP ** MAXFILOP - MAX -*DB2_BAR_AUTONOMIC_DISABLE = ** BLANK or char() -*DB2_CONNRETRIES_INTERVAL = ** BLANK or char() -*DB2_DXX_PATHS_ALLOWED_READ = ** BLANK or char() -*DB2_DXX_PATHS_ALLOWED_WRITE = ** BLANK or char() -*DB2_HADR_BUF_SIZE = 2*LOGBUFSZ ** BLANK or 0 - MAX -*DB2_LOGGING_DETAIL = ** BLANK or char() -*DB2_MAP_XML_AS_CLOB_FOR_DLC = NO ** YES, NO -*DB2_MAX_CLIENT_CONNRETRIES = ** BLANK or char() -*DB2_MAX_INACT_STMTS = ** 0 - 4294967296 -*DB2_MDC_ROLLOUT = IMMEDIATE ** DEFER, IMMEDIATE or OFF -*DB2_MINIMUM_CLIENT_LEVEL = ** BLANK or char() -*DB2_NUM_CKPW_DAEMONS = 3 ** 0 - 100 -*DB2_RESOURCE_POLICY = ** valid path to configuration file -*DB2_SKIPINSERTED = OFF ** ON, OFF -*DB2_SMS_TRUNC_TMPTABLE_THRESH = ** -1, 0-n where n is the number of extents per container that are to be maintained -*DB2_SNAPSHOT_NOAUTH = ** BLANK or char() -*DB2_TAPEMGR_TAPE_EXPIRATION = ** BLANK or char() -*DB2_DJ_COMM = OFF ** ON or OFF -*DB2_UPDDBCFG_SINGLE_DBPARTITION = ** YES, 1, TRUE or NO, 0, FALSE -*DB2_USE_DB2JCCT2_JROUTINE = ** ON, YES, 1, TRUE or OFF, NO, 0, FALSE -*DB2_UTIL_MSGPATH = instanceName/tmp directory ** BLANK or char() -*DB2_WORKLOAD = Not set ** BLANK, SAP - -** Database Settings -** ----------------- -*DATABASE = ** databas1: char(8) no spaces - this is the prefix for this DB set -*databas1.DATABASE_NAME = ** favorateDB: char(8) no spaces - this is the real database -*databas1.INSTANCE = ** db2inst1: char(8) no spaces - one value of INSTANCE keyword -*databas1.ALIAS = ** alias of databas1: char(8) no spaces and can not start with SYS, DBM or IBM -*databas1.LOCATION = ** local, remote, LOCAL or REMOTE; For client only product use remote or REMOTE -*databas1.SYSTEM_NAME = ** some remote host char(64) no spaces: for LOCATION=remote only -*databas1.AUTHENTICATION = ** CLIENT, SERVER, SERVER_ENCRYPT: optional -*databas1.PATH = ** the directory for the database: optional -*databas1.SVCENAME = ** service1: for remote LOCATION only -*databas1.USERNAME = ** db2user: char(8) no spaces -*databas1.PASSWORD = ** db2pwd: char(8) no spaces - -** Contact List Settings -** --------------------- -** Valid for root installation only -*DAS_CONTACT_LIST = ** LOCAL or REMOTE -*DAS_CONTACT_LIST_HOSTNAME = ** hostname for REMOTE CONTACT_LIST -*DAS_CONTACT_LIST_USERNAME = ** contactL: char(8) no spaces -*DAS_CONTACT_LIST_DOMAIN = ** contactLdomain: char(14) -*DAS_CONTACT_LIST_PASSWORD = ** contactLpasswd: char(14) - -** Contact Information For Each Instance -** ------------------------------------- -** Valid for root installation only -*CONTACT = contact1 ** contact1, char(80) -*contact1.NEW_CONTACT = YES ** YES or NO -*contact1.CONTACT_NAME = ** userName -*contact1.EMAIL = ** sysadmin@yourcompany.com - email address where the notification should be sent -*contact1.PAGER = ** YES or NO -*contact1.INSTANCE = ** DB2_INST - instance that this contact belongs to, this should be one of the values of keyword INSTANCE. - -** Information Center Settings -** --------------------------- -** The default location for accessing the DB2 documentation is the IBM website. -** Only edit this section if you wish to access DB2 documentation from a -** different location, such as your local computer or an intranet server. - -** The following DB2_DOCHOST keyword is used to specify where the Information -** Center server is installed. For example, "localhost" for the local computer. -*DB2_DOCHOST = ** Any valid hostname - -** The following DB2_DOCPORT keyword is used to specify the port number of the -** Information Center server. -*DB2_DOCPORT = ** 1024-65535 - -** (Valid for root installation only) Tivoli SA MP -** ----------------------------------------------- -** This keyword has been deprecated. The IBM Tivoli System Automation for -** Multiplatforms Base Component (Tivoli SA MP) will be automatically installed -** for you if you specified TYPICAL as the installation type. If an older -** version of the Tivoli SA MP is already installed it will be updated to the -** version on the DB2 installation media, if that update is supported. The -** Tivoli SA MP will only be installed or updated if you have the proper -** license. -*INSTALL_TSAMP = NO ** YES or NO. This keyword is deprecated. Valid for root installation only. - -** (Valid for root installation only) Pacemaker -** -------------------------------------------- -** The Pacemaker (PCMK) will be automatically installed for you if you -** specified TYPICAL as the installation type. If an older version of the -** Pacemaker is already installed it will be updated to the version on the Db2 -** installation media, if that update is supported. -*INSTALL_PCMK = NO ** YES or NO. Valid for root installation only. - -** (Valid for root installation only) Global Secure ToolKit -** -------------------------------------------------------- -** The Global Secure ToolKit will be automatically installed for you. If you -** don't want to install it, set the value to NO. -*INSTALL_ENCRYPTION = YES ** YES or NO.Valid for root installation only. - diff --git a/sources/db2.in/c3d/firstboot/scripts/10_installdb2.sh b/sources/db2.in/c3d/firstboot/scripts/10_installdb2.sh index 7a38d40..2af3118 100755 --- a/sources/db2.in/c3d/firstboot/scripts/10_installdb2.sh +++ b/sources/db2.in/c3d/firstboot/scripts/10_installdb2.sh @@ -9,4 +9,4 @@ rm --force --recursive /data/tmp mkdir /data/tmp chmod 1777 /data/tmp export DB2TMPDIR=/data/tmp -/data/v12.1.1/db2setup -r $DATA_PATH/db2server.rsp +/data/v11.5.9/db2setup -r $DATA_PATH/db2server.rsp diff --git a/sources/db2.in/c3d/firstboot/scripts/20_setupdb2.sh b/sources/db2.in/c3d/firstboot/scripts/20_setupdb2.sh index 9a3e106..5b789ef 100755 --- a/sources/db2.in/c3d/firstboot/scripts/20_setupdb2.sh +++ b/sources/db2.in/c3d/firstboot/scripts/20_setupdb2.sh @@ -8,7 +8,7 @@ DATA_PATH=$(realpath $REAL_PATH/../data) su --login db2admin --command "db2iauto -on db2admin" su --login db2admin --command "db2 update dbm cfg using diagsize 2" su --login db2admin --command "db2 update dbm cfg using sysmaint_group db2mgrp" -#/usr/local/bin/catalog-objects.sh +/usr/local/bin/catalog-objects.sh exit 0 su --login db2admin --command "db2 connect to slycrm; \ db2 revoke connect \ diff --git a/sources/db2.in/c3d/postinstall/scp/copy.list b/sources/db2.in/c3d/postinstall/scp/copy.list index 1a2c6f5..6c35814 100644 --- a/sources/db2.in/c3d/postinstall/scp/copy.list +++ b/sources/db2.in/c3d/postinstall/scp/copy.list @@ -1,2 +1,2 @@ # source_host source_path -#db2.in.useribm.hu /tmp/db2.tar +db2.in.useribm.hu /tmp/db2.tar diff --git a/sources/db2.in/c3d/postinstall/ssh/run.list b/sources/db2.in/c3d/postinstall/ssh/run.list index bcc8124..40221a4 100644 --- a/sources/db2.in/c3d/postinstall/ssh/run.list +++ b/sources/db2.in/c3d/postinstall/ssh/run.list @@ -1,2 +1,2 @@ # target_host target_user target_executable -#db2.in.useribm.hu root /usr/local/bin/list-objects.sh +db2.in.useribm.hu root /usr/local/bin/list-objects.sh